Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-01-159-2574 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: 3C37Z5U335Z050B, 7846128P1, 7CZ5U335D8050E5, 5910-01-159-2574, 01-159-2574, 5910011592574, 011592574

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 04 AUG 1983 01-159-2574

Drawings & Photos | NSN 5910-01-159-2574


Cross Reference | NSN 5910-01-159-2574

Part Number Cage Code Manufacturer
3C37Z5U335Z050B 56289 SPRAGUE ELECTRIC CO WORLD HQS
7846128P1 03538 LOCKHEED MARTIN CORPORATION DIV MST
7CZ5U335D8050E5 56289 SPRAGUE ELECTRIC CO WORLD HQS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-159-2574

Technical Data | NSN 5910-01-159-2574

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 3.300 MICROFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -20.00 TO 80.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 50.0 DC SINGLE SECTION
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE -56.0 TO 22.0 WITHOUT VOLTAGE APPLIED SINGLE SECTION
NONDERATED OPERATING TEMP 10.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
BODY STYLE 27A W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
BODY LENGTH 0.535 INCHES MAXIMUM
BODY WIDTH 0.550 INCHES MAXIMUM
BODY HEIGHT 0.260 INCHES MAXIMUM
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.250 INCHES MINIMUM
TERMINAL DIAMETER 0.025 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH 0.375 INCHES NOMINAL
CASE MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 5000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 4.0000
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
III END ITEM IDENTIFICATION 5840-01-141-4378 RADAR SET
(NON-CORE DATA) OVERALL LENGTH 0.535 INCHES MAXIMUM
(NON-CORE DATA) OVERALL HEIGHT 0.260 INCHES MAXIMUM
(NON-CORE DATA) OVERALL WIDTH 0.572 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5910-01-159-2574

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable