NSN 5910-01-156-7418 01-156-7418, 011567418
Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-01-156-7418 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Part Alternates: 5910-01-156-7418, 01-156-7418, 5910011567418, 011567418
Electrical and Electronic Equipment Components | Capacitors
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 01-156-7418 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
Cross Reference | NSN 5910-01-156-7418
Part Number | Cage Code | Manufacturer |
---|---|---|
923CC0G101J050B | 56289 | SPRAGUE ELECTRIC CO WORLD HQS |
M39014/22-0073 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
M39014/22-0373 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
M39014/22-0673 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
M39014/22-0973 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
MIL-C-39014/22 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
MIL-C-39014E | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5910-01-156-7418
Related Products | NSN 5910-01-156-7418
Technical Data | NSN 5910-01-156-7418
Characteristic | Specifications |
---|---|
CAPACITANCE VALUE PER SECTION | 100.000 PICOFARADS SINGLE SECTION |
TOLERANCE RANGE PER SECTION | -1.00 TO 1.00 PERCENT SINGLE SECTION |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 0.0 SINGLE SECTION |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION |
NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
BODY STYLE | 46A DUAL INLINE |
BODY LENGTH | 0.092 INCHES NOMINAL |
BODY WIDTH | 0.260 INCHES NOMINAL |
BODY HEIGHT | 0.128 INCHES NOMINAL |
SCHEMATIC DIAGRAM DESIGNATOR | 1C NO COMMON OR GROUNDED ELECTRODE(S) |
TERMINAL TYPE AND QUANTITY | 2 PRINTED CIRCUIT |
TERMINAL LENGTH | 0.120 INCHES MINIMUM AND 0.176 INCHES MAXIMUM |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO WIDTH | 0.325 INCHES NOMINAL |
CASE MATERIAL | PLASTIC |
INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS |
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.150 |
RELIABILITY INDICATOR | ESTABLISHED |
RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
TEST DATA DOCUMENT | 81349-MIL-C-39014 SPECIFICATION |
SPECIFICATION/STANDARD DATA | 81349-MIL-C-39014/22 GOVERNMENT SPECIFICATION |
III TERMINAL SURFACE TREATMENT | SOLDER |
(NON-CORE DATA) OVERALL LENGTH | 0.092 INCHES NOMINAL |
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10000.0 MEGOHMS |
(NON-CORE DATA) OVERALL HEIGHT | 0.341 INCHES MAXIMUM |
(NON-CORE DATA) OVERALL WIDTH | 0.337 INCHES MINIMUM |
MANUFACTURERS CODE | 81349 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-C-39014/22 |
MANUFACTURERS CODE | 81349 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M39014/22-0673 |
Restrictions/Controls & Freight Information | NSN 5910-01-156-7418
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Category | Code | Description |
---|---|---|
No Freight Information |