Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-01-032-5382 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: 5910-01-032-5382, 01-032-5382, 5910010325382, 010325382

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 01-032-5382

Drawings & Photos | NSN 5910-01-032-5382


Demand History | NSN 5910-01-032-5382

Part Number Request Date QTY Origin
5910-01-032-5382 2007-08-214 1 DIBBS
5910-01-032-5382 2007-07-184 1 DIBBS
5910-01-032-5382 2007-07-184 3 DIBBS
5910-01-032-5382 2007-05-132 1 DIBBS
5910-01-032-5382 2007-05-132 3 DIBBS
5910-01-032-5382 2007-05-132 1 DIBBS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-01-032-5382

Technical Data | NSN 5910-01-032-5382

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 100.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -10.00 TO 10.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 200.0 DC SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS 85.0 SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS -30.0 TO 30.0 SINGLE SECTION
NONDERATED OPERATING TEMP 85.0 DEG CELSIUS MAXIMUM
BODY STYLE 27A W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
BODY LENGTH 0.200 INCHES NOMINAL
BODY WIDTH 0.200 INCHES NOMINAL
BODY HEIGHT 0.100 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 0.125 INCHES MINIMUM
TERMINAL DIAMETER 0.020 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH 0.200 INCHES NOMINAL
CASE MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 1000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.1000
RELIABILITY INDICATOR NOT ESTABLISHED
III END ITEM IDENTIFICATION COUNTERMEASURES SET AN/ALQ-135V

Restrictions/Controls & Freight Information | NSN 5910-01-032-5382

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information