Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-00-984-0003 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: CC50TJ100C, MILC20, 5910-00-984-0003, 00-984-0003, 5910009840003, 009840003

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 01 JAN 1962 00-984-0003

Drawings & Photos | NSN 5910-00-984-0003


Cross Reference | NSN 5910-00-984-0003

Part Number Cage Code Manufacturer
CC50TJ100C 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MILC20 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-00-984-0003

Technical Data | NSN 5910-00-984-0003

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 10.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -0.25 TO 0.25 PICOFARADS SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 500.0 DC SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS -470.0 SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS -120.0 TO 120.0 SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 22B W/O MTG FACILITIES, RADIAL TERMINALS
BODY DIAMETER 0.280 INCHES NOMINAL
BODY LENGTH 0.120 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.250 INCHES MINIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER 0.190 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
CASE MATERIAL CERAMIC
INSULATION RESISTANCE AT REFERENCE TEMP 50000.0 MEGOHMS
QUALITY FACTOR AT REFERENCE TEMP 600.0000
RELIABILITY INDICATOR NOT ESTABLISHED
TEST DATA DOCUMENT 81349-MIL-C-20 SPECIFICATION
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 0.120 INCHES NOMINAL
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 1000.0 MEGOHMS
(NON-CORE DATA) OVERALL HEIGHT 0.280 INCHES NOMINAL
(NON-CORE DATA) OVERALL WIDTH 0.280 INCHES NOMINAL
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE CC50TJ100C
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MILC20

Restrictions/Controls & Freight Information | NSN 5910-00-984-0003

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061400 CONDENSERS/PARTS NOI/CAPACITORS
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 723 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5910-00-984-0003

Category Code Description
Cognizance Codes9NNavy-owned stocks of defense electronic material
Naval Inventory Control Point, Mechanicsburg
Source of SupplyS9EDefense Supply Center Columbus
Columbus, OH 43218
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesVTERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each