Product Details | GLASS DIELECTRIC FIXED CAPACITOR

5910-00-490-7810 A capacitor, whose capacitance value cannot be adjusted or varied, having a glass (silicas) or glass like substance (e.g., porcelain, vitreous enamel) as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: 5910-00-490-7810, 00-490-7810, 5910004907810, 004907810

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 00-490-7810

Drawings & Photos | NSN 5910-00-490-7810


Cross Reference | NSN 5910-00-490-7810

Part Number Cage Code Manufacturer
860168-18 13973 LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION
CY06C271F 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
CY06C271J 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M23269-10-3125 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
M23269/10-3124 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MILC11272-13 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MILC23269-10 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
TY06-271J 14674 CORNING GLASS WORKS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-00-490-7810

Technical Data | NSN 5910-00-490-7810

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 270.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -1.00 TO 1.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 300.0 DC SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS 140.0 SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS -25.0 TO 25.0 SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 27A W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
BODY LENGTH 0.300 INCHES NOMINAL
BODY WIDTH 0.200 INCHES NOMINAL
BODY HEIGHT 0.115 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.250 INCHES MINIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH 0.180 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
CASE MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 100000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.0010
RELIABILITY INDICATOR NOT ESTABLISHED
TEST DATA DOCUMENT 81349-MIL-C-11272+13 SPECIFICATION
III MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR D
III TERMINAL SURFACE TREATMENT GOLD
(NON-CORE DATA) PRECIOUS MATERIAL GOLD
III PRECIOUS MATERIAL AND LOCATION TERMINAL SURFACE GOLD
MANUFACTURERS CODE 81349
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE CY06C271F
MANUFACTURERS CODE 81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE MILC11272-13

Restrictions/Controls & Freight Information | NSN 5910-00-490-7810

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information