Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-00-329-5546 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: 5910-00-329-5546, 00-329-5546, 5910003295546, 003295546

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 00-329-5546

Drawings & Photos | NSN 5910-00-329-5546


Cross Reference | NSN 5910-00-329-5546

Part Number Cage Code Manufacturer
403849-39 30003 NAVAL AIR SYSTEMS COMMAND
515046 34764 SCIENTIFIC RADIO SYSTEMS INC
7637619P0010 99971 LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE
7637619P10 99971 LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE
913-4490-130 94987 CUBIC DEFENSE APPLICATIONS, INC.
913-4490-131 13499 ROCKWELL COLLINS, INC. DBA GOVERNMENT SYSTEMS
945833-3134 06481 NORTHROP GRUMMAN SYSTEMS CORPORATION
CCR75CG560GM 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
CCR75CG560GR 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
CCR75CG560JM 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
CCR75CG560JR 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
CCR75CG560KM 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
HRMC71A560J 96095 AVX CORPORATION DBA OLEAN ADVANCED PRODUCTS
MA101A560JHA 96095 AVX CORPORATION DBA OLEAN ADVANCED PRODUCTS
MIL-C-20/27 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MILC0020-27 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-00-329-5546

Technical Data | NSN 5910-00-329-5546

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 56.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -5.00 TO 5.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 100.0 DC SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS 0.0 SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS -30.0 TO 30.0 SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 26B W/O MTG FACILITIES, AXIAL TERMINALS
BODY DIAMETER 0.090 INCHES NOMINAL
BODY LENGTH 0.250 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.500 INCHES MINIMUM
TERMINAL DIAMETER 0.025 INCHES NOMINAL
CASE MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 100000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.2000
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 0.250 INCHES NOMINAL
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 10000.0 MEGOHMS
(NON-CORE DATA) OVERALL HEIGHT 0.090 INCHES NOMINAL
(NON-CORE DATA) OVERALL WIDTH 0.090 INCHES NOMINAL

Restrictions/Controls & Freight Information | NSN 5910-00-329-5546

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information