Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR

5910-00-328-0552 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.

Part Alternates: MA101A910JHA, HRMC701A910J, HRMC71A910J, 7637619P0026, 7637619P26, 5910-00-328-0552, 00-328-0552, 5910003280552, 003280552

Electrical and Electronic Equipment Components | Capacitors

Supply Group (FSG) NSN Assign. NIIN
59 00-328-0552

Drawings & Photos | NSN 5910-00-328-0552


Cross Reference | NSN 5910-00-328-0552

Part Number Cage Code Manufacturer
7637619P0026 99971 LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE
7637619P26 99971 LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE
CCR75CG910GR 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
CCR75CG910GS 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
CCR75CG910JM 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
CEB22U0GT 21066 WAYNE KERR ELECTRONICS INC
HRMC701A910J 96095 AVX CORPORATION DBA OLEAN ADVANCED PRODUCTS
HRMC71A910J 96095 AVX CORPORATION DBA OLEAN ADVANCED PRODUCTS
MA101A910JHA 96095 AVX CORPORATION DBA OLEAN ADVANCED PRODUCTS
MIL-C-0020/27 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY
MIL-C-20/27 81349 MILITARY SPECIFICATIONS PROMULGATED BY MILITARY

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5910-00-328-0552

Technical Data | NSN 5910-00-328-0552

Characteristic Specifications
CAPACITANCE VALUE PER SECTION 91.000 PICOFARADS SINGLE SECTION
TOLERANCE RANGE PER SECTION -5.00 TO 5.00 PERCENT SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION 100.0 DC SINGLE SECTION
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS 0.0 SINGLE SECTION
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS -30.0 TO 30.0 SINGLE SECTION
NONDERATED OPERATING TEMP -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM
BODY STYLE 26B W/O MTG FACILITIES, AXIAL TERMINALS
BODY DIAMETER 0.090 INCHES NOMINAL
BODY LENGTH 0.250 INCHES NOMINAL
SCHEMATIC DIAGRAM DESIGNATOR 1C NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL TYPE AND QUANTITY 2 UNINSULATED WIRE LEAD
TERMINAL LENGTH 1.500 INCHES MINIMUM
TERMINAL DIAMETER 0.025 INCHES NOMINAL
CASE MATERIAL PLASTIC
INSULATION RESISTANCE AT REFERENCE TEMP 100000.0 MEGOHMS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT 0.2000
RELIABILITY INDICATOR NOT ESTABLISHED
III TERMINAL SURFACE TREATMENT SOLDER
(NON-CORE DATA) OVERALL LENGTH 0.250 INCHES NOMINAL
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP 10000.0 MEGOHMS
(NON-CORE DATA) OVERALL HEIGHT 0.090 INCHES NOMINAL
(NON-CORE DATA) OVERALL WIDTH 0.090 INCHES NOMINAL

Restrictions/Controls & Freight Information | NSN 5910-00-328-0552

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information