NSN 5910-00-265-5775 CC32LG750J, MILC209, MILC20-9
Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-00-265-5775 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Part Alternates: CC32LG750J, MILC209, MILC20-9, 5910-00-265-5775, 00-265-5775, 5910002655775, 002655775
Electrical and Electronic Equipment Components | Capacitors
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 01 JAN 1963 | 00-265-5775 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5910-00-265-5775
Related Products | NSN 5910-00-265-5775
Technical Data | NSN 5910-00-265-5775
Characteristic | Specifications |
---|---|
CAPACITANCE VALUE PER SECTION | 75.000 PICOFARADS SINGLE SECTION |
TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -80.0 SINGLE SECTION |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION |
NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
BODY STYLE | 33B W/O MTG FACILITIES, RADIAL TERMINALS |
BODY DIAMETER | 0.225 INCHES NOMINAL |
BODY LENGTH | 0.820 INCHES NOMINAL |
SCHEMATIC DIAGRAM DESIGNATOR | 1C NO COMMON OR GROUNDED ELECTRODE(S) |
TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
TERMINAL LENGTH | 1.250 INCHES MINIMUM |
TERMINAL DIAMETER | 0.025 INCHES NOMINAL |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.650 INCHES NOMINAL |
CASE MATERIAL | CERAMIC |
INSULATION RESISTANCE AT REFERENCE TEMP | 50000.0 MEGOHMS |
QUALITY FACTOR AT REFERENCE TEMP | 1000.0000 |
RELIABILITY INDICATOR | NOT ESTABLISHED |
TEST DATA DOCUMENT | 81349-MIL-C-20 SPECIFICATION |
SPECIFICATION/STANDARD DATA | 81349-MIL-C-20/9B GOVERNMENT SPECIFICATION |
III TERMINAL SURFACE TREATMENT | SOLDER |
III INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 1000.0 MEGOHMS |
MANUFACTURERS CODE | 81349 |
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | CC32LG750J |
MANUFACTURERS CODE | 81349 |
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILC20-9 |
Restrictions/Controls & Freight Information | NSN 5910-00-265-5775
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Precious Metals Indicator Code: | U | Precious metal type is unknown |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Category | Code | Description |
---|---|---|
NMF Description | 061400 | CONDENSERS/PARTS NOI/CAPACITORS |
Less than car load rating | P | 77.5 |
Less than truck load rating | P | 77.5 |
Water commodity Code | 658 | unknown |
Originating Activity Code | XX | |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | H | Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |