NSN 5910-00-001-8827 00-001-8827, 000018827
Product Details | CERAMIC DIELECTRIC FIXED CAPACITOR
5910-00-001-8827 A capacitor, whose capacitance value cannot be adjusted or varied, having a ceramic dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Part Alternates: 5910-00-001-8827, 00-001-8827, 5910000018827, 000018827
Electrical and Electronic Equipment Components | Capacitors
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
59 | 00-001-8827 | 00007 ( CAPACITOR, FIXED, CERAMIC DIELECTRIC ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5910-00-001-8827
Related Products | NSN 5910-00-001-8827
Technical Data | NSN 5910-00-001-8827
Characteristic | Specifications |
---|---|
CAPACITANCE VALUE PER SECTION | 200.000 PICOFARADS SINGLE SECTION |
TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 1000.0 DC SINGLE SECTION |
TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -1500.0 SINGLE SECTION |
TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 250.0 SINGLE SECTION |
NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
BODY STYLE | 22B W/O MTG FACILITIES, RADIAL TERMINALS |
BODY DIAMETER | 0.570 INCHES MAXIMUM |
BODY LENGTH | 0.156 INCHES MAXIMUM |
SCHEMATIC DIAGRAM DESIGNATOR | 1C NO COMMON OR GROUNDED ELECTRODE(S) |
TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
TERMINAL LENGTH | 1.500 INCHES MINIMUM |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.218 INCHES MINIMUM AND 0.282 INCHES MAXIMUM |
CASE MATERIAL | PLASTIC |
INSULATION RESISTANCE AT REFERENCE TEMP | 7500.0 MEGOHMS |
RELIABILITY INDICATOR | NOT ESTABLISHED |
III TERMINAL SURFACE TREATMENT | SOLDER |
Restrictions/Controls & Freight Information | NSN 5910-00-001-8827
Category | Code | Description |
---|---|---|
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Category | Code | Description |
---|---|---|
No Freight Information |