Product Details | PRECISION WIRE WOUND VARIABLE RESISTOR

5905-01-168-3262 A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.

Part Alternates: 331207, 35098-9-104, 3540S656104, 3540S-656-104, 4702331207, 4702-331207, 5905-01-168-3262, 01-168-3262, 5905011683262, 011683262, 350989104

Electrical and Electronic Equipment Components | Resistors

Supply Group (FSG) NSN Assign. NIIN
59 15 DEC 1983 01-168-3262

Drawings & Photos | NSN 5905-01-168-3262


Demand History | NSN 5905-01-168-3262

Part Number Request Date QTY Origin
331207 2010-09-15 1

Cross Reference | NSN 5905-01-168-3262

Part Number Cage Code Manufacturer
331207 89536 FLUKE CORPORATION
35098-9-104 80294 BOURNS INSTRUMENTS INC
3540S-656-104 80294 BOURNS INSTRUMENTS INC
4702-331207 89536 FLUKE CORPORATION

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5905-01-168-3262

Technical Data | NSN 5905-01-168-3262

Characteristic Specifications
SECTION QUANTITY 1
ELECTRICAL RESISTANCE PER SECTION 10.0 KILOHMS SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT -5.0 TO 5.0 SINGLE SECTION
FUNCTION CONFORMITY PER SECTION SINGLE SECTION INDEPENDENT LINEARITY
FUNCTION CHARACTERISTIC PER SECTION SINGLE SECTION LINEAR
FUNCTION CONFORMITY TOLERANCE PER SECTION -0.25 TO 0.25 SINGLE SECTION
SHAFT RUNOUT 0.003 INCHES
LATERAL RUNOUT 0.005 INCHES
PILOT DIAMETER RUNOUT 0.003 INCHES
SHAFT RADIAL PLAY 0.003 INCHES
SHAFT BEARING TYPE SLEEVE
SHAFT END PLAY 0.010 INCHES
MAXIMUM STOP TORQUE 48.00 INCH-OUNCES
MAXIMUM STARTING TORQUE 2.00 INCH-OUNCES
MAXIMUM RUNNING TORQUE 2.00 INCH-OUNCES
TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS -20.0 TO 20.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS 2.0 FREE AIR SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER 25.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER 105.0 SINGLE SECTION
BODY STYLE 1B CYLINDRICAL BUSHING MOUNTED
BODY DIAMETER 0.875 INCHES NOMINAL
BODY LENGTH 0.750 INCHES NOMINAL
MOUNTING BUSHING LENGTH 0.312 INCHES NOMINAL
ACTUATOR TYPE SINGLE SHAFT
SHAFT STYLE 3C ROUND, SLOTTED
SHAFT DIAMETER 0.2497 INCHES MAXIMUM
SHAFT LENGTH 0.812 INCHES NOMINAL
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG 3600.0 NOMINAL
ACTUATOR TRAVEL CONTROL FEATURE STOPS
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION 3600.0 NOMINAL
NONTURN DEVICE LOCATION AT 6 OCLOCK
NONTURN DEVICE RADIUS 0.290 INCHES NOMINAL
MOUNTING METHOD STANDARD BUSHING
SCREW THREAD SERIES DESIGNATOR UNEF
SCREW THREAD DIAMETER 0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH 32.0
FEATURES PROVIDED NONMETALLIC SHAFT
TERMINAL TYPE AND QUANTITY 3 TAB, SOLDER LUG
TERMINAL LOCATION LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE
RELIABILITY INDICATOR NOT ESTABLISHED
III UNPACKAGED UNIT WEIGHT 21.00 GRAMS
III CUBIC MEASURE 0.574 CUBIC INCHES
III PRECIOUS MATERIAL GOLD
III PRECIOUS MATERIAL AND LOCATION TERMINAL SURFACES GOLD

Restrictions/Controls & Freight Information | NSN 5905-01-168-3262

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:BESD sensitivity
Precious Metals Indicator Code:GItem contains gold
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 062960 REOSTATS/PARTS NOI
Less than car load rating
Less than truck load rating P 77.5
Water commodity Code 72D unknown
Originating Activity Code TX Defense Supply Center Columbus
Columbus, OH 43218
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).

Management | NSN 5905-01-168-3262

Category Code Description
Materiel Category and Inventory ManagerQ Electronics Materiel (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeEHSX:ELECTRONIC COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each