Product Details | RING SPACER

5365-01-218-9404 A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.

Part Alternates: 8019044038, 8019044-038, 5365-01-218-9404, 01-218-9404, 5365012189404, 012189404

Hardware and Abrasives | Bushings, Rings, Shims, and Spacers

Supply Group (FSG) NSN Assign. NIIN
53 20 OCT 1985 01-218-9404

Cross Reference | NSN 5365-01-218-9404

Part Number Cage Code Manufacturer
8019044-038 58259 BALLISTIC MISSILE OFFICE /AFSC/

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5365-01-218-9404

Technical Data | NSN 5365-01-218-9404

Characteristic Specifications
MATERIAL STEEL
MATERIAL DOCUMENT AND CLASSIFICATION ASTM A582,COND A ASSN STD SINGLE MATERIAL RESPONSE
OVERALL THICKNESS 0.01825 INCHES MINIMUM AND 0.01835 INCHES MAXIMUM
INSIDE DIAMETER 1.794 INCHES MINIMUM AND 1.796 INCHES MAXIMUM
OUTSIDE DIAMETER 1.912 INCHES MINIMUM AND 1.914 INCHES MAXIMUM
SURFACE FINISH 32.0 MICROINCHES LARGEST OUTSIDE DIAMETER 32.0 MICROINCHES LEFT SIDE 32.0 MICROINCHES RIGHT SIDE 32.0 MICROINCHES BORE
SPECIAL FEATURES CHAMFERED 4 PLACES 0.004-0.007 BY 43.0-47.0 DEG
CRITICALITY CODE JUSTIFICATION ADUM
III FSC APPLICATION DATA THIRD GENERATION GYRO
MANUFACTURERS CODE 58259
DESIGN CONTROL REFERENCE 8019044-038

Restrictions/Controls & Freight Information | NSN 5365-01-218-9404

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:YThe item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 106940 SPACERS/SEPARATORS I/S NOI TUBULAR
Less than car load rating T 55
Less than truck load rating T 55.0
Water commodity Code 713 unknown
Originating Activity Code SU Ogden Air Logistics Center
Hill AFB, UT 84056-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5365-01-218-9404

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeAISU:ADVANCED INTERCONTINENTAL BALLISTIC (MX)
Price ValidationP The current standard price is the initial negotiated provisioned price.
  • This is the price paid by DoD for the item as the result of price negotiation of the Provisioned Item Order (PIO) or other initial negotiated price.
  • ZOP or Standard Price challenges are permissible but should be supported with adequate justification.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each