Product Details | PLATE SPACER

5365-01-100-7397 A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.202259000005365000000

Part Alternates: SMB189389, SM-B-189389, 5365-01-100-7397, 01-100-7397, 5365011007397, 011007397

Hardware and Abrasives | Bushings, Rings, Shims, and Spacers

Supply Group (FSG) NSN Assign. NIIN
53 11 SEP 1980 01-100-7397

Drawings & Photos | NSN 5365-01-100-7397


Cross Reference | NSN 5365-01-100-7397

Part Number Cage Code Manufacturer
SM-B-189389 80063 US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5365-01-100-7397

Technical Data | NSN 5365-01-100-7397

Characteristic Specifications
MATERIAL PLASTIC PHENOLIC
MATERIAL DOCUMENT AND CLASSIFICATION MIL-P-3115,TY PBE-P MIL SPEC SINGLE MATERIAL RESPONSE
BOLT HOLE QUANTITY 3
STYLE DESIGNATOR A16A NON-CIRCULAR W/SQUARE CORNERS
HOLE DIAMETER 0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM
OVERALL LENGTH 1.375 INCHES NOMINAL
OVERALL WIDTH 0.312 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 0.562 INCHES NOMINAL

Restrictions/Controls & Freight Information | NSN 5365-01-100-7397

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
No Freight Information