Product Details | PLATE SPACER

5365-00-660-1393 A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.202259000005365000000

Part Alternates: 9065853, 5365-00-660-1393, 00-660-1393, 5365006601393, 006601393

Hardware and Abrasives | Bushings, Rings, Shims, and Spacers

Supply Group (FSG) NSN Assign. NIIN
53 01 JAN 1963 00-660-1393

Cross Reference | NSN 5365-00-660-1393

Part Number Cage Code Manufacturer
9065853 18876 U S ARMY AVIATION AND MISSILE COMMAND

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5365-00-660-1393

Technical Data | NSN 5365-00-660-1393

Characteristic Specifications
MATERIAL COPPER ALLOY
SURFACE TREATMENT RHODIUM
BOLT HOLE QUANTITY 6
APERTURE WIDTH 0.400 INCHES MINIMUM AND 0.401 INCHES MAXIMUM
APERTURE LENGTH 0.899 INCHES MINIMUM AND 0.901 INCHES MAXIMUM
HOLE DIAMETER 0.170 INCHES MINIMUM AND 0.173 INCHES MAXIMUM
OVERALL LENGTH 3.000 INCHES NOMINAL
OVERALL WIDTH 1.625 INCHES NOMINAL
INSIDE CORNER RADIUS 0.031 INCHES NOMINAL
OUTSIDE CORNER RADIUS 0.063 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH 1.276 INCHES MINIMUM AND 1.284 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH 1.302 INCHES MINIMUM AND 1.304 INCHES MAXIMUM
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH 0.191 INCHES NOMINAL
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH 0.1705 INCHES NOMINAL
III PRECIOUS MATERIAL RHODIUM
III PRECIOUS MATERIAL AND LOCATION OVERALL SURFACE RHODIUM
III FSC APPLICATION DATA TEST SET GUIDED MISSILE
MANUFACTURERS CODE 18876
DESIGN CONTROL REFERENCE 9065853

Restrictions/Controls & Freight Information | NSN 5365-00-660-1393

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:PItem contains platinum family metals
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 194120 WASHERS/GASKETS/PCKG DVCS NOI
Less than car load rating Q 70
Less than truck load rating W Rating Variable
Water commodity Code 713 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable