NSN 5340-01-623-0555 BCH464C20P, CH49250420P, CH49250-4-20P
Product Details | DOUBLE ANGLE BRACKET
5340-01-623-0555 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: BCH464C20P, CH49250420P, CH49250-4-20P , CN170SC420, CN170SC4-20 , 3M464C20DP , 5340-01-623-0555, 01-623-0555, 5340016230555, 016230555
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 2013303 | 01-623-0555 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Demand History | NSN 5340-01-623-0555
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 3M464C20DP | 2022-07-207 | 1 | DIBBS |
| BCH464C20P | 2022-07-207 | 1 | DIBBS |
| CH49250-4-20P | 2022-07-207 | 1 | DIBBS |
| CN170SC4-20 | 2022-07-207 | 1 | DIBBS |
| 3M464C20DP | 2022-03-67 | 1 | DIBBS |
| BCH464C20P | 2022-03-67 | 1 | DIBBS |
| CH49250-4-20P | 2022-03-67 | 1 | DIBBS |
| CN170SC4-20 | 2022-03-67 | 1 | DIBBS |
| 3M464C20DP | 2021-03-66 | 1 | DIBBS |
| BCH464C20P | 2021-03-66 | 1 | DIBBS |
| CH49250-4-20P | 2021-03-66 | 1 | DIBBS |
| CN170SC4-20 | 2021-03-66 | 1 | DIBBS |
| 3M464C20DP | 2019-11-330 | 1 | DIBBS |
| BCH464C20P | 2019-11-330 | 1 | DIBBS |
| CH49250-4-20P | 2019-11-330 | 1 | DIBBS |
| CN170SC4-20 | 2019-11-330 | 1 | DIBBS |
| 3M464C20DP | 2019-09-260 | 1 | DIBBS |
| BCH464C20P | 2019-09-260 | 1 | DIBBS |
| CH49250-4-20P | 2019-09-260 | 1 | DIBBS |
| CN170SC4-20 | 2019-09-260 | 1 | DIBBS |
| 3M464C20DP | 2019-04-107 | 1 | DIBBS |
| BCH464C20P | 2019-04-107 | 1 | DIBBS |
| CH49250-4-20P | 2019-04-107 | 1 | DIBBS |
| CN170SC4-20 | 2019-04-107 | 1 | DIBBS |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 5340-01-623-0555
Related Products | NSN 5340-01-623-0555
Technical Data | NSN 5340-01-623-0555
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5510 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | PASSIVATE AND |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC 1ST TREATMENT RESPONSE AND |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| FIRST LEG LENGTH | 72.0 INCHES NOMINAL |
| SECOND LEG LENGTH | 72.0 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.034 INCHES MINIMUM AND |
| SECOND LEG THICKNESS | 0.034 INCHES MINIMUM AND |
| CENTER SECTION HEIGHT | 0.034 INCHES MINIMUM AND |
| CENTER SECTION WIDTH | 0.552 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.034 INCHES MINIMUM AND |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG WIDTH | 0.298 INCHES MAXIMUM |
| SECOND LEG WIDTH | 0.298 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SPECIAL FEATURES | BOTH LEGS HAVE NOTCHED SLIDES THAT ARE 0.080/0.090 WIDE BY 0.215/0.225 LONG ALONG THE LENGTH;CENTER OF BRACKET HAS HOLES TO ACCOMODATE NUTS;CENTER TO CENTER NUT HOLE MEASUREMENT IS 2.50 INCHES TO ACCOMDATE 0.2500-28 UNJF-3B NUT |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | GANG CHANNEL |
Restrictions/Controls & Freight Information | NSN 5340-01-623-0555
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Electro-static Discharge Susceptible: | A | No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||
Management | NSN 5340-01-623-0555
Navy| Category | Code | Description |
|---|---|---|
| Cognizance Codes | 9B | Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg |
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DN | Department of the Navy |
| Service Organization | N | U.S. Navy |
| Acquisition Advice Codes | Z | INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |