Product Details | BLOCK CLAMP

5340-01-594-5686 A square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.20315600000534000005342000000

Part Alternates: 1549430, 5340-01-594-5686, 01-594-5686, 5340015945686, 015945686

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 25 APR 2011 01-594-5686

Cross Reference | NSN 5340-01-594-5686

Part Number Cage Code Manufacturer
1549430 10001 NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-01-594-5686

Technical Data | NSN 5340-01-594-5686

Characteristic Specifications
BLOCK HEIGHT 0.484 INCHES NOMINAL
SURFACE TREATMENT PHOSPHATE ZINC
SPECIAL FEATURES SUBSTITUTE MATERIAL = OD 8853 TYPE A GR II OR QQ-S-633 C1020
DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH 0.250 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES 3.938 INCHES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCY CLAMP HALF, TUBE
SPECIAL TEST FEATURES APPLY PROTECTIVE COATING MIL-P-16232 TYPE M CLASS 1 & FINISH COAT ALL SURFACES WITH DRYING TYPE PRESERVATIVE OIL CONFORMING TO DWG 1603000 SO THAT SURFACES SHALL SUSTAIN A 4HR SALT SPRAY TEST
STYLE DESIGNATOR RECTANGULAR
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-P-16232 TYPE M CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SIXTH CLAMPING HOLES 3.312 INCHES NOMINAL
MATERIAL STEEL COMP 1020

Restrictions/Controls & Freight Information | NSN 5340-01-594-5686

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information