NSN 5340-01-498-0666 12478972, 12478972-4, 01-498-0666
Product Details | DOUBLE ANGLE BRACKET
5340-01-498-0666 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 12478972, 12478972-4, 5340-01-498-0666, 01-498-0666, 5340014980666, 014980666, 124789724
Hardware and Abrasives | Hardware, Commercial
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
53 | 13 JUN 2002 | 01-498-0666 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5340-01-498-0666
Related Products | NSN 5340-01-498-0666
Technical Data | NSN 5340-01-498-0666
Characteristic | Specifications |
---|---|
MATERIAL | ALUMINUM ALLOY 6061 |
MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209M NATIONAL SPEC ALL MATERIAL RESPONSES |
SURFACE TREATMENT | CHROMATE AND PRIMER EPOXY AND PLASTIC POLYURETHANE |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL STD 1ST TREATMENT RESPONSE AND FED-STD-595 FED STD 2ND TREATMENT RESPONSE |
STYLE DESIGNATOR | 13 ADJACENT ANGLES |
III FIRST LEG LENGTH | 0.910 INCHES NOMINAL |
III SECOND LEG LENGTH | 1.500 INCHES NOMINAL |
III FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
III SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
III CENTER SECTION HEIGHT | 1.450 INCHES MINIMUM AND 1.850 INCHES MAXIMUM |
III CENTER SECTION WIDTH | 4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM |
III CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL |
III FIRST LEG ANGLE | 0.13 RADIANS NOMINAL |
III SECOND LEG ANGLE | 0.13 RADIANS NOMINAL |
FIRST LEG STYLE | 104 SQUARE |
FIRST LEG WIDTH | 4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM |
FIRST LEG HOLE ARRANGEMENT STYLE | 133 TWO HOLES |
FIRST LEG HOLE DIAMETER | 0.374 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.560 INCHES NOMINAL |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.940 INCHES NOMINAL |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.313 INCHES NOMINAL |
SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
SECOND LEG STYLE | 114 CHAMFERED ENDS |
SECOND LEG WIDTH | 4.190 INCHES MINIMUM AND 4.310 INCHES MAXIMUM |
SECOND LEG END WIDTH | 3.690 INCHES MINIMUM AND 3.810 INCHES MAXIMUM |
SECOND LEG CHAMFER ANGLE | 45.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
SECOND LEG HOLE ARRANGEMENT STYLE | 133 TWO HOLES |
SECOND LEG HOLE DIAMETER | 0.195 INCHES MINIMUM AND 0.206 INCHES MAXIMUM |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.275 INCHES NOMINAL |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.350 INCHES NOMINAL |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
MOUNTING HOLE TYPE | PLAIN |
SPECIAL FEATURES | THIS ITEM IS THE EXACT OPPOSITE OF P/N 12478972-3; 2ND "HOLE" ON 1ST LEG IS ACTUALLY AA SLOT 0.375 IN (ALONG WIDTH) BY 0.50 IN (ALONG LENGTH) AND CENTERED 0.38 IN FROM EDGE ALONG LENGTH; FINISH: COLOR IS 383 GREEN, CHIP NO. 34094 OF FED-STD-595; OMIT PRIME AND PAINT FROM HOLES;DIMENSIONA; LIMITS AND SURFACE TEXTURE APPLY WITHOUT |
Restrictions/Controls & Freight Information | NSN 5340-01-498-0666
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
NMF Description | 093600 | BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC |
Less than car load rating | ||
Less than truck load rating | Q | 70.0 |
Water commodity Code | 713 | unknown |
Originating Activity Code | KH | Defense Industrial Supply Center Philadelphia, PA 19111 |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5340-01-498-0666
Category | Code | Description |
---|---|---|
Materiel Category and Inventory Manager | T | Industrial Supplies (DLA/GSA Items) |
Appropriation and Budget Activity | 2 | Stock Fund Secondary Items |
Management Inventory Segment | 2 | NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable. |
Specific Group/Generic Code | 0 | Medical Materiel |
Weapons Systems/End Item or Homogeneous Group | 00 | DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item |
Accounting Requirements Code | X | Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items. |
Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
Agency | DA | Department of the Army |
Service Organization | A | U.S. Army |
Reparability | Z | This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item. |
Acquisition Advice Codes | J | NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |