NSN 5340-01-295-7963 41388, 01-295-7963, 012957963
Product Details | DOUBLE ANGLE BRACKET
5340-01-295-7963 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 41388, 5340-01-295-7963, 01-295-7963, 5340012957963, 012957963
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 11 MAR 1989 | 01-295-7963 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-01-295-7963
Cross Reference | NSN 5340-01-295-7963
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 41388 | 24235 | WILLIAMS INTERNATIONAL CO., L.L.C. |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 5340-01-295-7963
Related Products | NSN 5340-01-295-7963
Technical Data | NSN 5340-01-295-7963
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| SURFACE TREATMENT | PASSIVATE |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| III FIRST LEG THICKNESS | 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| III SECOND LEG THICKNESS | 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| III CENTER SECTION WIDTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| III CENTER SECTION THICKNESS | 0.059 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| III FIRST LEG ANGLE | 29.0 DEGREES MINIMUM AND 31.0 DEGREES MAXIMUM |
| III SECOND LEG ANGLE | 29.0 DEGREES MINIMUM AND 31.0 DEGREES MAXIMUM |
| FIRST LEG STYLE | 104 SQUARE |
| FIRST LEG WIDTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | 132 ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.198 INCHES MINIMUM AND 0.208 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.200 INCHES MINIMUM AND 0.240 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | 104 SQUARE |
| SECOND LEG WIDTH | 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | 207 2 SLOTS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.139 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.142 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.312 INCHES NOMINAL |
| SECOND LEG SLOT LENGTH | 0.336 INCHES MINIMUM AND 0.356 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM |
| MOUNTING HOLE TYPE | PLAIN |
| MANUFACTURERS CODE | 24235 |
| DESIGN CONTROL REFERENCE | 41388 |
Restrictions/Controls & Freight Information | NSN 5340-01-295-7963
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 093600 | BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC |
| Less than car load rating | Q | 70 |
| Less than truck load rating | Q | 70.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | SX | Oklahoma City Air Logistics Center Tinker AFB, OK 73145-3043 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | ||
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | Z | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |