Product Details | ANGLE BRACKET

5340-01-211-3718 A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.202534000005342000000

Part Alternates: R0238143, R023814-3, 5340-01-211-3718, 01-211-3718, 5340012113718, 012113718

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 26 JUN 1985 01-211-3718

Drawings & Photos | NSN 5340-01-211-3718


Cross Reference | NSN 5340-01-211-3718

Part Number Cage Code Manufacturer
R023814-3 02602 AEROJET ROCKETDYNE OF DE, INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-01-211-3718

Technical Data | NSN 5340-01-211-3718

Characteristic Specifications
MATERIAL ALUMINUM ALLOY 6061
MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-250/11,ALLOY 6061,T4 FED SPEC SINGLE MATERIAL RESPONSE
SURFACE TREATMENT ANODIZE
STYLE DESIGNATOR 6 ANGLE
FIRST LEG LENGTH 1.260 INCHES NOMINAL
SECOND LEG LENGTH 1.800 INCHES NOMINAL
FIRST LEG THICKNESS 0.062 INCHES NOMINAL
SECOND LEG THICKNESS 0.062 INCHES NOMINAL
FIRST LEG ANGLE 90.0 DEGREES NOMINAL
FIRST LEG STYLE 107 ANGLE
FIRST LEG WIDTH 1.260 INCHES NOMINAL
FIRST LEG END WIDTH 0.250 INCHES NOMINAL
SECOND LEG WIDTH 1.800 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE 132 ONE HOLE
FIRST LEG HOLE DIAMETER 0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH 0.510 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH 0.400 INCHES NOMINAL
SECOND LEG HOLE DIAMETER 0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH 1.000 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH 0.400 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH 0.400 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG NOT IDENTICAL
SECOND LEG STYLE 107 ANGLE
SECOND LEG HOLE ARRANGEMENT STYLE 134 TWO HOLES
MANUFACTURERS CODE 02602
DESIGN CONTROL REFERENCE R023814-3

Restrictions/Controls & Freight Information | NSN 5340-01-211-3718

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:BMunitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.)
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 093600 BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC
Less than car load rating R 65
Less than truck load rating Q 70.0
Water commodity Code 713 unknown
Originating Activity Code SU Ogden Air Logistics Center
Hill AFB, UT 84056-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5340-01-211-3718

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeAHSU:LGM-30 MINUTEMAN
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each