NSN 5340-01-182-3334 16610414003, 16610414-003, 01-182-3334
Product Details | DOUBLE ANGLE BRACKET
5340-01-182-3334 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 16610414003, 16610414-003, 5340-01-182-3334, 01-182-3334, 5340011823334, 011823334
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 22 JUN 1984 | 01-182-3334 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-01-182-3334
Cross Reference | NSN 5340-01-182-3334
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 16610414-003 | 28009 | SYPRIS ELECTRONICS, LLC DIV SYPRIS ELECTRONICS, LLC - |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-01-182-3334
Technical Data | NSN 5340-01-182-3334
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 1018 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | CADMIUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| III FIRST LEG LENGTH | 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| III SECOND LEG LENGTH | 0.660 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
| III FIRST LEG THICKNESS | 0.060 INCHES NOMINAL |
| III SECOND LEG THICKNESS | 0.060 INCHES NOMINAL |
| III CENTER SECTION HEIGHT | 1.438 INCHES MINIMUM AND 1.458 INCHES MAXIMUM |
| III CENTER SECTION WIDTH | 0.537 INCHES MINIMUM AND 0.557 INCHES MAXIMUM |
| III CENTER SECTION THICKNESS | 0.060 INCHES NOMINAL |
| III FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| III SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | 104 SQUARE |
| FIRST LEG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 131 NO HOLE |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | 104 SQUARE |
| SECOND LEG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 145 ONE SLOT |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL |
| SECOND LEG SLOT LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.190 INCHES NOMINAL |
| III SUPPLEMENTARY FEATURES | SNUBBER LOWER BRACKET /RIGHT OFFSET/ |
| III END ITEM IDENTIFICATION | 5895-01-119-1601 |
| MANUFACTURERS CODE | 28009 |
| DESIGN CONTROL REFERENCE | 16610414-003 |
Restrictions/Controls & Freight Information | NSN 5340-01-182-3334
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||