Product Details | ACCESS COVER

5340-01-156-5724 A rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.20310050018Guns, through 30mm2590000053400020Hardware, Commercial

Part Alternates: M8434553P1, 151A559P001, 151A559P1, 5340-01-156-5724, 01-156-5724, 5340011565724, 011565724

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 22 JUN 1983 01-156-5724

Drawings & Photos | NSN 5340-01-156-5724


Cross Reference | NSN 5340-01-156-5724

Part Number Cage Code Manufacturer
151A559P001 03538 LOCKHEED MARTIN CORPORATION DIV MST
151A559P1 03538 LOCKHEED MARTIN CORPORATION DIV MST
151A559P1 24446 GENERAL ELECTRIC CO
M8434553P1 03538 LOCKHEED MARTIN CORPORATION DIV MST
M8434553P1 24446 GENERAL ELECTRIC CO

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-01-156-5724

Technical Data | NSN 5340-01-156-5724

Characteristic Specifications
LENGTH 5.501 INCHES NOMINAL
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH 0.438 INCHES NOMINAL
DISTANCE BETWEEN HOLES ALONG LENGTH 4.625 INCHES NOMINAL
DISTANCE BETWEEN HOLES ALONG WIDTH 4.625 INCHES NOMINAL
CORNER RADIUS 0.344 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE 26 FLAT
SECURING DEVICE TYPE SPECIAL
SPECIAL FEATURES HAS ANOTHER HOLE 0.128 IN. DIA. DRILLED 0.312 IN. DEEP LOCATED 2.312 IN. FROM HOLE C TO HOLE C BOTH ENDS ALONG LGTH; ALS0 HAS 3 GROMMETS AND THE 4 OUTER HOLES HAVE SPOTFACING 0.625 IN. AROUND OUTER EDGE
MANUFACTURERS CODE 03538
DESIGN CONTROL REFERENCE 151A559P001

Restrictions/Controls & Freight Information | NSN 5340-01-156-5724

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 095190 HARDWARE, NOI
Less than car load rating Q 70
Less than truck load rating W Rating Variable
Water commodity Code 713 unknown
Originating Activity Code TA Sacramento Air Logistics Center
McClellan AFB, CA 95652-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable