Product Details | ANGLE BRACKET

5340-01-040-9556 A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.202534000005342000000

Part Alternates: 2047005023, 204-70050-23, 5340-01-040-9556, 01-040-9556, 5340010409556, 010409556

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 18 MAY 1977 01-040-9556

Drawings & Photos | NSN 5340-01-040-9556


Cross Reference | NSN 5340-01-040-9556

Part Number Cage Code Manufacturer
204-70050-23 81205 THE BOEING COMPANY DBA BOEING

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-01-040-9556

Technical Data | NSN 5340-01-040-9556

Characteristic Specifications
MATERIAL STEEL COMP 321
MATERIAL DOCUMENT AND CLASSIFICATION MIL-S-6721 MIL SPEC SINGLE MATERIAL RESPONSE
STYLE DESIGNATOR 6 ANGLE
III FIRST LEG LENGTH 1.650 INCHES NOMINAL
III SECOND LEG LENGTH 2.000 INCHES NOMINAL
III FIRST LEG THICKNESS 0.063 INCHES NOMINAL
III SECOND LEG THICKNESS 0.063 INCHES NOMINAL
III FIRST LEG ANGLE 90.0 DEGREES NOMINAL
FIRST LEG STYLE 105
FIRST LEG WIDTH 2.500 INCHES NOMINAL
FIRST LEG CORNER RADIUS 0.500 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE 133
FIRST LEG HOLE DIAMETER 0.342 INCHES MINIMUM AND 0.354 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH 2.000 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH 0.500 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH 0.500 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG NOT IDENTICAL
SECOND LEG STYLE 110
SECOND LEG WIDTH 2.500 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE 132
SECOND LEG HOLE DIAMETER 0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH 0.500 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH 0.880 INCHES NOMINAL
III END ITEM IDENTIFICATION TF33-PW-100/100A ENGINE
MANUFACTURERS CODE 81205
DESIGN CONTROL REFERENCE 204-70050-23

Restrictions/Controls & Freight Information | NSN 5340-01-040-9556

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 093600 BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC
Less than car load rating
Less than truck load rating Q 70.0
Water commodity Code 713 unknown
Originating Activity Code SX Oklahoma City Air Logistics Center
Tinker AFB, OK 73145-3043
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable