NSN 5340-01-040-8438 2047005045, 204-70050-45, 01-040-8438
Product Details | DOUBLE ANGLE BRACKET
5340-01-040-8438 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 2047005045, 204-70050-45, 5340-01-040-8438, 01-040-8438, 5340010408438, 010408438
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01-040-8438 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-01-040-8438
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-01-040-8438
Technical Data | NSN 5340-01-040-8438
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL CORROSION RESISTING |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| III FIRST LEG LENGTH | 1.000 INCHES NOMINAL |
| III SECOND LEG LENGTH | 2.120 INCHES NOMINAL |
| III FIRST LEG THICKNESS | 0.063 INCHES NOMINAL |
| III SECOND LEG THICKNESS | 0.063 INCHES NOMINAL |
| III CENTER SECTION HEIGHT | 0.970 INCHES NOMINAL |
| III CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL |
| III FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| III SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | 107 ANGLE |
| FIRST LEG END WIDTH | 1.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 132 ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.218 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.560 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG END WIDTH | 2.150 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 136 TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.279 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.530 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL |
| III END ITEM IDENTIFICATION | TF33-PW-100/100A ENGINE |
| MANUFACTURERS CODE | 81205 |
| DESIGN CONTROL REFERENCE | 204-70050-45 |
Restrictions/Controls & Freight Information | NSN 5340-01-040-8438
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||