NSN 5340-01-027-4074 8436991, 01-027-4074, 010274074
Product Details | DOUBLE ANGLE BRACKET
5340-01-027-4074 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 8436991, 5340-01-027-4074, 01-027-4074, 5340010274074, 010274074
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 16 SEP 1976 | 01-027-4074 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-01-027-4074
Cross Reference | NSN 5340-01-027-4074
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 8436991 | 19204 | ARMY UNITED STATES DEPARTMENT OF THE |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 5340-01-027-4074
Related Products | NSN 5340-01-027-4074
Technical Data | NSN 5340-01-027-4074
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 6061 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | ENAMEL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| FIRST LEG LENGTH | 1.140 INCHES MINIMUM AND 1.200 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.140 INCHES MINIMUM AND 1.200 INCHES MAXIMUM |
| FIRST LEG THICKNESS | 0.100 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.100 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 3.290 INCHES MINIMUM AND 3.330 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.100 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 270.0 DEGREES NOMINAL |
| FIRST LEG STYLE | 104 SQUARE |
| FIRST LEG WIDTH | 4.980 INCHES MINIMUM AND 5.020 INCHES MAXIMUM |
| SECOND LEG WIDTH | 5.0200 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 133 TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.285 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.580 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| SECOND LEG HOLE DIAMETER | 0.3000 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.7500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.6300 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.9500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG STYLE | 104 SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | 133 TWO HOLES |
| SPECIAL FEATURES | BODY HAS 3 HOLES STYLE 139 0.285/0.300 DIA 3.090 ALONG LENGTH C-TO-C 1.860 C-TO-C ALONG WIDTH AND 1.860 C-TO-C ALONG WIDTH 0.620/0.700 FROM BOTTOM EDGE TO LOWER HOLE CENTER 0.700/0.740 LEFT EDGE TO HOLE CENTER |
| (NON-CORE DATA) FABRICATION METHOD | WROUGHT |
| MANUFACTURERS CODE | 19204 |
| DESIGN CONTROL REFERENCE | 8436991 |
Restrictions/Controls & Freight Information | NSN 5340-01-027-4074
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
| Category | Code | Description |
|---|---|---|
| NMF Description | 013120 | ALUMINUM ARTICLE NOI SUB 6 |
| Less than car load rating | J | 100.2 |
| Less than truck load rating | J | 100.2 |
| Water commodity Code | 576 | unknown |
| Originating Activity Code | BF | U.S. Army Armament and Chemical Acquisition and Logistics Activity Rock Island, IL 61299-6000 |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | ||
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |