Product Details | DOUBLE ANGLE BRACKET

5340-01-014-4386 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000

Part Alternates: 3183314, 5340-01-014-4386, 01-014-4386, 5340010144386, 010144386

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 01-014-4386

Drawings & Photos | NSN 5340-01-014-4386


Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-01-014-4386

Technical Data | NSN 5340-01-014-4386

Characteristic Specifications
MATERIAL ALUMINUM ALLOY 6061
MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-250/11,T4 OR T6 FED SPEC SINGLE MATERIAL RESPONSE
STYLE DESIGNATOR 11 DOUBLE ANGLE
III FIRST LEG LENGTH 0.372 INCHES MINIMUM AND 0.472 INCHES MAXIMUM
III SECOND LEG LENGTH 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
III FIRST LEG THICKNESS 0.062 INCHES NOMINAL
III SECOND LEG THICKNESS 0.062 INCHES NOMINAL
III CENTER SECTION HEIGHT 0.442 INCHES MINIMUM AND 0.452 INCHES MAXIMUM
III CENTER SECTION WIDTH 2.9700 INCHES MINIMUM AND 3.0300 INCHES MAXIMUM
III CENTER SECTION THICKNESS 0.062 INCHES NOMINAL
III FIRST LEG ANGLE 90.0 DEGREES NOMINAL
III SECOND LEG ANGLE 90.0 DEGREES NOMINAL
FIRST LEG STYLE 104 SQUARE
FIRST LEG WIDTH 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE 131 NO HOLE
SECOND LEG RELATIONSHIP TO FIRST LEG NOT IDENTICAL
SECOND LEG STYLE 104 SQUARE
SECOND LEG WIDTH 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE 133 TWO HOLES
SECOND LEG HOLE DIAMETER 0.162 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH 2.250 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH 0.375 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH 0.220 INCHES NOMINAL

Restrictions/Controls & Freight Information | NSN 5340-01-014-4386

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information