Product Details | DOUBLE ANGLE BRACKET

5340-00-819-6832 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000

Part Alternates: 648067, 5340-00-819-6832, 00-819-6832, 5340008196832, 008196832

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 29 MAR 1968 00-819-6832

Drawings & Photos | NSN 5340-00-819-6832


Cross Reference | NSN 5340-00-819-6832

Part Number Cage Code Manufacturer
648067 11449 TURBO POWER & MARINE SYSTEM INC SUB OF UNITED TECHNOLOGIES CORP
648067 77445 UNITED TECHNOLOGIES CORPORATION DBA PRATT WHITNEY-SPARE PARTS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-00-819-6832

Technical Data | NSN 5340-00-819-6832

Characteristic Specifications
MATERIAL STEEL
MATERIAL DOCUMENT AND CLASSIFICATION AMS2544 ASSN STD SINGLE MATERIAL RESPONSE
STYLE DESIGNATOR 11 DOUBLE ANGLE
III FIRST LEG THICKNESS 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
III SECOND LEG THICKNESS 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
III CENTER SECTION HEIGHT 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
III CENTER SECTION WIDTH 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
III CENTER SECTION THICKNESS 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
FIRST LEG STYLE 102 END RADIUS
FIRST LEG WIDTH 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
FIRST LEG END RADIUS 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
FIRST LEG HOLE ARRANGEMENT STYLE 132 ONE HOLE
FIRST LEG HOLE DIAMETER 0.278 INCHES MINIMUM AND 0.282 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
SECOND LEG STYLE 102 END RADIUS
SECOND LEG WIDTH 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
SECOND LEG END RADIUS 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE 132 ONE HOLE
SECOND LEG HOLE DIAMETER 0.278 INCHES MINIMUM AND 0.282 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
(NON-CORE DATA) FABRICATION METHOD MACHINED
MANUFACTURERS CODE 11449
DESIGN CONTROL REFERENCE 648067

Restrictions/Controls & Freight Information | NSN 5340-00-819-6832

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 093600 BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC
Less than car load rating
Less than truck load rating Q 70.0
Water commodity Code 713 unknown
Originating Activity Code SX Oklahoma City Air Logistics Center
Tinker AFB, OK 73145-3043
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code Z unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5340-00-819-6832

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodePQSX:PRATT & WHITNEY ENGINES AND COMPONENTS, TF-30
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Price ValidationV The current standard price has been validated.
  • The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
  • The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
  • ZOP or Standard price challenges are permissible but must be supported by adequate justification.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each