NSN 5340-00-808-1002 39107944, 39-10794-4, 421117
Product Details | ANGLE BRACKET
5340-00-808-1002 A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.202534000005342000000
Part Alternates: 39107944, 39-10794-4, 421117, 5340-00-808-1002, 00-808-1002, 5340008081002, 008081002
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01 JAN 1962 | 00-808-1002 | 16900 ( BRACKET, ANGLE ) |
Drawings & Photos | NSN 5340-00-808-1002
Demand History | NSN 5340-00-808-1002
| Part Number | Request Date | QTY | Origin |
|---|---|---|---|
| 421117 | 2024-06-154 | 14 | DIBBS |
| 39-10794-4 | 2023-11-330 | 14 | DIBBS |
| 421117 | 2023-11-330 | 14 | DIBBS |
| 39-10794-4 | 2023-09-256 | 14 | DIBBS |
| 421117 | 2023-09-256 | 14 | DIBBS |
| 39-10794-4 | 2023-04-115 | 14 | DIBBS |
| 421117 | 2023-04-115 | 14 | DIBBS |
| 39-10794-4 | 2023-02-44 | 21 | DIBBS |
| 421117 | 2023-02-44 | 21 | DIBBS |
| 39-10794-4 | 2022-02-59 | 11 | DIBBS |
| 421117 | 2022-02-59 | 11 | DIBBS |
| 39-10794-4 | 2022-02-54 | 10 | DIBBS |
| 421117 | 2022-02-54 | 10 | DIBBS |
| 39-10794-4 | 2022-02-53 | 10 | DIBBS |
| 421117 | 2022-02-53 | 10 | DIBBS |
| 39-10794-4 | 2022-02-48 | 11 | DIBBS |
| 421117 | 2022-02-48 | 11 | DIBBS |
| 39-10794-4 | 2021-10-292 | 10 | DIBBS |
| 421117 | 2021-10-292 | 10 | DIBBS |
| 39-10794-4 | 2021-07-199 | 19 | DIBBS |
| 421117 | 2021-07-199 | 19 | DIBBS |
| 39-10794-4 | 2020-10-287 | 30 | DIBBS |
| 421117 | 2020-10-287 | 30 | DIBBS |
| 39-10794-4 | 2020-10-278 | 30 | DIBBS |
| 421117 | 2020-10-278 | 30 | DIBBS |
| 39-10794-4 | 2020-02-56 | 22 | DIBBS |
| 421117 | 2020-02-56 | 22 | DIBBS |
| 39-10794-4 | 2020-02-48 | 22 | DIBBS |
| 421117 | 2020-02-48 | 22 | DIBBS |
| 5340-00-808-1002 | 2016-04-97 | 26 | DIBBS |
| 5340-00-808-1002 | 2016-02-35 | 19 | DIBBS |
| 5340-00-808-1002 | 2014-04-111 | 49 | DIBBS |
| 5340-00-808-1002 | 2014-04-98 | 49 | DIBBS |
| 5340-00-808-1002 | 2013-10-302 | 17 | DIBBS |
| 5340-00-808-1002 | 2013-10-287 | 17 | DIBBS |
| 5340-00-808-1002 | 2013-04-106 | 17 | DIBBS |
| 5340-00-808-1002 | 2012-11-318 | 17 | DIBBS |
| 5340-00-808-1002 | 2012-08-214 | 17 | DIBBS |
| 5340-00-808-1002 | 2012-07-184 | 17 | DIBBS |
| 5340-00-808-1002 | 2012-05-125 | 17 | DIBBS |
| 5340-00-808-1002 | 2011-03-68 | 19 | DIBBS |
| 5340-00-808-1002 | 2010-07-187 | 17 | DIBBS |
| 5340-00-808-1002 | 2009-12-344 | 17 | DIBBS |
| 5340-00-808-1002 | 2009-09-264 | 17 | DIBBS |
| 5340-00-808-1002 | 2009-03-80 | 17 | DIBBS |
Cross Reference | NSN 5340-00-808-1002
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
Ernie G.
Honeywell
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
NSNs for Compare ( up to 4 ): Add 5340-00-808-1002
Related Products | NSN 5340-00-808-1002
Technical Data | NSN 5340-00-808-1002
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 4130 OR STEEL COMP 8630 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6350 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6355 ASSN STD 2ND MATERIAL RESPONSE |
| SURFACE TREATMENT | CADMIUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | 6 ANGLE |
| III FIRST LEG LENGTH | 0.730 INCHES NOMINAL |
| III SECOND LEG LENGTH | 0.970 INCHES NOMINAL |
| III FIRST LEG THICKNESS | 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| III SECOND LEG THICKNESS | 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM |
| III FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 140 |
| FIRST LEG HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN LOWER HOLE CENTERS ALONG WIDTH | 1.919 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.031 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.959 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG STYLE | 105 |
| SECOND LEG WIDTH | 4.220 INCHES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.219 INCHES NOMINAL |
| (NON-CORE DATA) FABRICATION METHOD | MACHINED |
| III END ITEM IDENTIFICATION | W/S:ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); AIRCRAFT, STRATOFORTRESS B-52; ENGINE, AIRCRAFT, TF-33-P-7 (C-141A/B); ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H) |
| MANUFACTURERS CODE | 77445 |
| DESIGN CONTROL REFERENCE | 421117 |
Restrictions/Controls & Freight Information | NSN 5340-00-808-1002
| Category | Code | Description |
|---|---|---|
| Shelf-Life Code: | 0 | Nondeteriorative |
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Controlled Inventory Item Code: | U | UNCLASSIFIED |
| Precious Metals Indicator Code: | A | Item does not contain precious metal |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 093600 | BRACKETS/BUSHINGS/JOINTS/MOUNTS ETC |
| Less than car load rating | ||
| Less than truck load rating | Q | 70.0 |
| Water commodity Code | 713 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | ||
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | Z | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5340-00-808-1002
Air Force| Category | Code | Description |
|---|---|---|
| Budget Code | 9 | General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors. |
| Materiel Management Aggregation Code | RV | SX:PRATT & WHITNEY JET ENGINES & COMPONENTS TF-33 |
| Fund Code | SF | Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point. |
| Price Validation | V | The current standard price has been validated.
|
| Source of Supply | SMS | Defense Logistics Agency Enterprise Business Systems |
| Agency | DF | Department of the Air Force |
| Service Organization | F | U.S. Air Force |
| Reparability | N | Stock Fund (except Munitions) |
| Acquisition Advice Codes | D | DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures. |
| Controlled Item Code | U | UNCLASSIFIED |
| Shelf Life Code | 0 | Nondeteriorative |
| Purchasing | QTY UOM |
1 EA : Each |