Product Details | ANGLE BRACKET

5340-00-649-6858 A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.202534000005342000000

Part Alternates: 9062083, 5340-00-649-6858, 00-649-6858, 5340006496858, 006496858

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 01 JAN 1963 00-649-6858

Drawings & Photos | NSN 5340-00-649-6858


Cross Reference | NSN 5340-00-649-6858

Part Number Cage Code Manufacturer
9062083 18876 U S ARMY AVIATION AND MISSILE COMMAND

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-00-649-6858

Technical Data | NSN 5340-00-649-6858

Characteristic Specifications
MATERIAL ALUMINUM ALLOY 5052
MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-250/8,H32 FED SPEC SINGLE MATERIAL RESPONSE
STYLE DESIGNATOR 6 ANGLE
III FIRST LEG LENGTH 0.562 INCHES NOMINAL
III SECOND LEG LENGTH 1.500 INCHES NOMINAL
III FIRST LEG THICKNESS 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
III SECOND LEG THICKNESS 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
III FIRST LEG ANGLE 90.0 DEGREES NOMINAL
FIRST LEG STYLE 105
FIRST LEG WIDTH 1.625 INCHES NOMINAL
FIRST LEG CORNER RADIUS 0.125 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE 145
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH ANY ACCEPTABLE
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH 0.313 INCHES NOMINAL
FIRST LEG SLOT LENGTH 0.437 INCHES NOMINAL
FIRST LEG SLOT WIDTH 0.125 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG NOT IDENTICAL
SECOND LEG STYLE 105
SECOND LEG WIDTH 1.609 INCHES MINIMUM AND 1.641 INCHES MAXIMUM
SECOND LEG CORNER RADIUS 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
SECOND LEG HOLE ARRANGEMENT STYLE 141
SECOND LEG HOLE DIAMETER 0.144 INCHES MINIMUM AND 0.149 INCHES MAXIMUM
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH 2.375 INCHES NOMINAL
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH 0.750 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH 0.187 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH 0.250 INCHES NOMINAL
SPECIAL FEATURES FIRST LEG HAS TWO SLOTTED HOLES EQUALLY SPACED,SECOND LEG HAS RECTANGLE HOLE IN CENTER
(NON-CORE DATA) FABRICATION METHOD STAMPED

Restrictions/Controls & Freight Information | NSN 5340-00-649-6858

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 013120 ALUMINUM ARTICLE NOI SUB 6
Less than car load rating J 100.2
Less than truck load rating J 100.2
Water commodity Code 576 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable