NSN 5340-00-631-3075 336C970P1, 00-631-3075, 006313075
Product Details | DOUBLE ANGLE BRACKET
5340-00-631-3075 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 336C970P1, 5340-00-631-3075, 00-631-3075, 5340006313075, 006313075
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01 JAN 1963 | 00-631-3075 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-00-631-3075
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-00-631-3075
Technical Data | NSN 5340-00-631-3075
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 321 |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| III FIRST LEG LENGTH | 1.415 INCHES MINIMUM AND 1.555 INCHES MAXIMUM |
| III FIRST LEG THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| III SECOND LEG THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| III CENTER SECTION WIDTH | 1.620 INCHES MINIMUM AND 1.700 INCHES MAXIMUM |
| III CENTER SECTION THICKNESS | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| III FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| III SECOND LEG ANGLE | 135.0 DEGREES NOMINAL |
| FIRST LEG STYLE | 104 SQUARE |
| FIRST LEG WIDTH | 2.010 INCHES MINIMUM AND 2.090 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | 133 TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.281 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.300 INCHES MINIMUM AND 1.320 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH | 1.300 INCHES MINIMUM AND 1.320 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.190 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| SECOND LEG STYLE | 108 END RADIUS AND TAPERED |
| SECOND LEG HOLE ARRANGEMENT STYLE | 146 ONE SLOT |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.455 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
| SECOND LEG SLOT LENGTH | 0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| (NON-CORE DATA) FABRICATION METHOD | MACHINED |
| MANUFACTURERS CODE | 07482 |
| DESIGN CONTROL REFERENCE | 336C970P1 |
Restrictions/Controls & Freight Information | NSN 5340-00-631-3075
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||