Product Details | DOUBLE ANGLE BRACKET

5340-00-584-6416 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000

Part Alternates: 705B401P3, 5340-00-584-6416, 00-584-6416, 5340005846416, 005846416

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 01 JAN 1963 00-584-6416

Drawings & Photos | NSN 5340-00-584-6416


Cross Reference | NSN 5340-00-584-6416

Part Number Cage Code Manufacturer
705B401P3 07482 GENERAL ELECTRIC COMPANY DBA GE
705B401P3 24446 GENERAL ELECTRIC CO

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-00-584-6416

Technical Data | NSN 5340-00-584-6416

Characteristic Specifications
MATERIAL STEEL
STYLE DESIGNATOR 11 DOUBLE ANGLE
III FIRST LEG LENGTH 0.800 INCHES NOMINAL
III SECOND LEG LENGTH 0.843 INCHES NOMINAL
III FIRST LEG THICKNESS 0.063 INCHES NOMINAL
III SECOND LEG THICKNESS 0.063 INCHES NOMINAL
III CENTER SECTION HEIGHT 0.495 INCHES NOMINAL
III CENTER SECTION WIDTH 0.620 INCHES NOMINAL
III CENTER SECTION THICKNESS 0.063 INCHES NOMINAL
III FIRST LEG ANGLE 90.0 DEGREES NOMINAL
III SECOND LEG ANGLE 86.0 DEGREES NOMINAL
FIRST LEG STYLE 102 END RADIUS
FIRST LEG WIDTH 0.620 INCHES NOMINAL
FIRST LEG END RADIUS 0.310 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE 132 ONE HOLE
FIRST LEG HOLE DIAMETER 0.219 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH 0.310 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH 0.310 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG NOT IDENTICAL
SECOND LEG STYLE 102 END RADIUS
SECOND LEG WIDTH 0.620 INCHES NOMINAL
SECOND LEG END RADIUS 0.310 INCHES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE 132 ONE HOLE
SECOND LEG HOLE DIAMETER 0.343 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH 0.310 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH 0.310 INCHES NOMINAL
(NON-CORE DATA) FABRICATION METHOD STAMPED
MANUFACTURERS CODE 07482
DESIGN CONTROL REFERENCE 705B401P3

Restrictions/Controls & Freight Information | NSN 5340-00-584-6416

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 063520 WAVEGUIDE IN BOXES/CRATES
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 723 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable