NSN 5340-00-582-2240 TA15020, TA150-20, 00-582-2240
Product Details | MENDING PLATE
5340-00-582-2240 A flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
Part Alternates: TA15020, TA150-20, 5340-00-582-2240, 00-582-2240, 5340005822240, 005822240
Hardware and Abrasives | Hardware, Commercial
Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
---|---|---|---|
53 | 01 JAN 1963 | 00-582-2240 | 09726 ( PLATE, MENDING ) |
Cross Reference | NSN 5340-00-582-2240
Part Number | Cage Code | Manufacturer |
---|---|---|
TA150-20 | 84971 | KIRKHILL-TA CO. DBA TA DIVISION |
Request a Quote
What Our Customers Say
Compare
NSNs for Compare ( up to 4 ): Add 5340-00-582-2240
Related Products | NSN 5340-00-582-2240
Technical Data | NSN 5340-00-582-2240
Characteristic | Specifications |
---|---|
MATERIAL | ALUMINUM ALLOY 2024 |
SURFACE TREATMENT | ANODIZE |
STYLE DESIGNATOR | 82 RECTANGULAR |
III OVERALL LENGTH | 2.062 INCHES NOMINAL |
III OVERALL WIDTH | 0.750 INCHES NOMINAL |
III MATERIAL THICKNESS | 0.051 INCHES NOMINAL |
III MOUNTING HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
MOUNTING HOLE TYPE | COUNTERSUNK |
Restrictions/Controls & Freight Information | NSN 5340-00-582-2240
Category | Code | Description |
---|---|---|
Shelf-Life Code: | 0 | Nondeteriorative |
Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
Demilitarization Code: | A | Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required. |
Controlled Inventory Item Code: | U | UNCLASSIFIED |
Precious Metals Indicator Code: | A | Item does not contain precious metal |
Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
Automatic Data Processing Equipment: | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9) |
Category | Code | Description |
---|---|---|
NMF Description | 013560 | ALUM PLATE R SHEET |
Less than car load rating | S | 60 |
Less than truck load rating | W | Rating Variable |
Water commodity Code | 576 | unknown |
Originating Activity Code | XX | |
Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
Air Commodity | B | Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials. |
Air Special Handling | Z | No special handling required. |
Special Handling Code | 9 | unknonwn |
HAZMAT | ||
Type of Cargo | Z | No special type of cargo code applicable |
Management | NSN 5340-00-582-2240
Category | Code | Description |
---|---|---|
Cognizance Codes | 9Z | Navy-owned stocks of defense industrial material Naval Inventory Control Point, Mechanicsburg |
Source of Supply | S9I | Defense Industrial Supply Center Philadelphia, PA 19111 |
Agency | DN | Department of the Navy |
Service Organization | N | U.S. Navy |
Acquisition Advice Codes | V | TERMINAL ITEM # Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable. |
Controlled Item Code | U | UNCLASSIFIED |
Shelf Life Code | 0 | Nondeteriorative |
Purchasing | QTY UOM |
1 EA : Each |