NSN 5340-00-527-0642 00-527-0642, 005270642
Product Details | COMPRESSION CUP
5340-00-527-0642 A nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
Part Alternates: 5340-00-527-0642, 00-527-0642, 5340005270642, 005270642
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01 JAN 1963 | 00-527-0642 | 03435 ( CUP, COMPRESSION ) |
Drawings & Photos | NSN 5340-00-527-0642
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-00-527-0642
Technical Data | NSN 5340-00-527-0642
| Characteristic | Specifications |
|---|---|
| MATERIAL | LEATHER OVERALL |
| STYLE DESIGNATOR | D1 ROUND |
| OVERALL LENGTH | 0.375 INCHES NOMINAL |
| OVERALL DIAMETER | 1.750 INCHES NOMINAL |
| CENTER HOLE DIAMETER | 0.500 INCHES NOMINAL |
| BASE MATERIAL THICKNESS | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| RECESS INSIDE DIAMETER | 1.500 INCHES MINIMUM AND 1.520 INCHES MAXIMUM |
| RECESS MAJOR INSIDE DIAMETER | 0.125 INCHES MINIMUM |
| FEATHER EDGE ANGLE | 30.0 DEGREES NOMINAL |
| III FSC APPLICATION DATA | WINCH BRAKE HYDRAULIC CYLINDER,TANK RECOVERY |
Restrictions/Controls & Freight Information | NSN 5340-00-527-0642
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| NMF Description | 110580 | LEATHER GOODS NOI |
| Less than car load rating | J | 100.2 |
| Less than truck load rating | J | 100.2 |
| Water commodity Code | 772 | unknown |
| Originating Activity Code | XX | |
| Air Dimension Code | A | Shipment is not a consolidation and does not exceed 72 inches in any dimension. |
| Air Commodity | K | Clothing, including clothing equipment (other than arms and chemical supplies) cordage, fabrics and leather, parachutes, etc. |
| Air Special Handling | Z | No special handling required. |
| Special Handling Code | 9 | unknonwn |
| HAZMAT | ||
| Type of Cargo | Z | No special type of cargo code applicable |