NSN 5340-00-521-3267 20912813, 20-91281-3, 00-521-3267
Product Details | DOUBLE ANGLE BRACKET
5340-00-521-3267 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.202534000005342000000
Part Alternates: 20912813, 20-91281-3, 5340-00-521-3267, 00-521-3267, 5340005213267, 005213267
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01 JAN 1963 | 00-521-3267 | 20354 ( BRACKET, DOUBLE ANGLE ) |
Drawings & Photos | NSN 5340-00-521-3267
Cross Reference | NSN 5340-00-521-3267
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 20-91281-3 | 76301 | BOEING COMPANY, THE DBA BOEING |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-00-521-3267
Technical Data | NSN 5340-00-521-3267
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 1010 |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE1010 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE TREATMENT | CADMIUM |
| STYLE DESIGNATOR | 11 DOUBLE ANGLE |
| III FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| III SECOND LEG THICKNESS | 0.062 INCHES NOMINAL |
| III CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL |
| FIRST LEG STYLE | 102 END RADIUS |
| FIRST LEG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.375 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 132 ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.448 INCHES MINIMUM AND 0.458 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.375 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL |
| SECOND LEG STYLE | 108 END RADIUS AND TAPERED |
| SECOND LEG END RADIUS | 0.188 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 132 ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.125 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL |
| MANUFACTURERS CODE | 76301 |
| DESIGN CONTROL REFERENCE | 20-91281-3 |
Restrictions/Controls & Freight Information | NSN 5340-00-521-3267
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||