NSN 5340-00-264-0204 12140, 00-264-0204, 002640204
Product Details | COMPRESSION CUP
5340-00-264-0204 A nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
Part Alternates: 12140, 5340-00-264-0204, 00-264-0204, 5340002640204, 002640204
Hardware and Abrasives | Hardware, Commercial
| Supply Group (FSG) | NSN Assign. | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | 01 JAN 1963 | 00-264-0204 | 03435 ( CUP, COMPRESSION ) |
Request a Quote
What Our Customers Say
Thank you very much for the excellent service and professional customer care.
The service was excellent. I can think of no improvements to date that you can make regarding internet sales.
The representative for WBParts was efficient & handled our request in a timely & professional manner.
Tried two other sources, neither of them responded, was all done online, never spoke to anyone.
The response is quick and the price is often very good. We are completely satisfied.
Compare
Related Products | NSN 5340-00-264-0204
Technical Data | NSN 5340-00-264-0204
| Characteristic | Specifications |
|---|---|
| MATERIAL | LEATHER OVERALL |
| OVERALL LENGTH | 1.000 INCHES NOMINAL |
| BOLT CIRCLE DIAMETER | 2.750 INCHES NOMINAL |
| CENTER HOLE DIAMETER | 2.000 INCHES NOMINAL |
| BOLT HOLE DIAMETER | 0.313 INCHES NOMINAL |
| BASE MATERIAL THICKNESS | 0.188 INCHES NOMINAL |
| RECESS INSIDE DIAMETER | 3.625 INCHES NOMINAL |
| FEATHER EDGE ANGLE | 60.0 DEGREES NOMINAL |
| BOLT HOLE QUANTITY | 4 |
| SPECIAL FEATURES | MATERIAL MUST BE HYDRAULIC OIL RESISTING; 1000 PSI WORKING PRESSURE |
| III FSC APPLICATION DATA | LEANING FRONT WHEEL JACK ASSY,ROAD GRADER |
Restrictions/Controls & Freight Information | NSN 5340-00-264-0204
| Category | Code | Description |
|---|---|---|
| Hazardous Material Indicator Code | P | There is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product |
| Demilitarization Code: | B | Munitions List Item - Mutilation (MUT) to the point of scrap required. (Formerly: Demilitarization not required. Trade Security Controls (TSCs) required at disposition.) |
| Precious Metals Indicator Code: | U | Precious metal type is unknown |
| Criticality Code: | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| Category | Code | Description |
|---|---|---|
| No Freight Information | ||