Product Details | DIRT AND LIQUID DEFLECTOR

5340-00-213-1935 An item so shaped as to deflect one or more of the following: dust, dirt, grease, oil, or liquid into a desired direction or away from a particular area. Can be attached to a stationary or with a revolving part. May or may not be a mechanical device.21516150056Helicopter Rotor Blades, Drive Mechanisms and Components16600062Aircraft Air Conditioning, Heating, and Pressurizing Equipment16800049Miscellaneous Aircraft Accessories and Components25200039Vehicular Power Transmission Components25300060Vehicular Brake, Steering, Axle, Wheel, and Track Components25400035Vehicular Furniture and Accessories28050063Gasoline Reciprocating Engines, Except Aircraft; and Components28150029Diesel Engines and Components28250029Steam Turbines and Components28350096Gas Turbines and Jet Engines; Non-Aircraft Prime Mover, Aircraft Non-Prime Mover, and Components29950042Miscellaneous Engine Accessories, Aircraft43100028Compressors and Vacuum Pumps43200020Power and Hand Pumps49300041Lubrication and Fuel Dispensing Equipment53400020Hardware, Commercial

Part Alternates: 163540, 27190, 5340-00-213-1935, 00-213-1935, 5340002131935, 002131935

Hardware and Abrasives | Hardware, Commercial

Supply Group (FSG) NSN Assign. NIIN
53 01 JAN 1963 00-213-1935

Drawings & Photos | NSN 5340-00-213-1935


Cross Reference | NSN 5340-00-213-1935

Part Number Cage Code Manufacturer
163540 00198 PRATT & WHITNEY CANADA CIE DIVPRATT & WHITNEY CANADA CORP.
163540 77445 UNITED TECHNOLOGIES CORPORATION DBA PRATT WHITNEY-SPARE PARTS
27190 00198 PRATT & WHITNEY CANADA CIE DIVPRATT & WHITNEY CANADA CORP.
27190 77445 UNITED TECHNOLOGIES CORPORATION DBA PRATT WHITNEY-SPARE PARTS

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-00-213-1935

Technical Data | NSN 5340-00-213-1935

Characteristic Specifications
STYLE DESIGNATOR 26 ROUND, TAPERED
INSIDE DIAMETER 3.938 INCHES MINIMUM AND 3.942 INCHES MAXIMUM
OUTSIDE DIAMETER 6.021 INCHES MINIMUM AND 6.041 INCHES MAXIMUM
MATERIAL THICKNESS 0.060 INCHES MINIMUM AND 0.078 INCHES MAXIMUM
BODY LENGTH 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM
MATERIAL STEEL
III FSC APPLICATION DATA ACFT ENG R1830
MANUFACTURERS CODE 00198
DESIGN CONTROL REFERENCE 163540

Restrictions/Controls & Freight Information | NSN 5340-00-213-1935

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
No Freight Information