Product Details | ACCESS COVER

5340-00-067-8353 A rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.20310050018Guns, through 30mm2590000053400020Hardware, Commercial

Part Alternates: 000678353

Aircraft and Airframe Structural Components | Airframe Structural Components

Supply Group (FSG) NSN Assign. NIIN
15 00-067-8353

Drawings & Photos | NSN 1560-00-067-8353


Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5340-00-067-8353

Technical Data | NSN 5340-00-067-8353

Characteristic Specifications
WIDTH 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM
LENGTH 2.970 INCHES MINIMUM AND 3.130 INCHES MAXIMUM
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH 1.927 INCHES MINIMUM AND 1.947 INCHES MAXIMUM
DISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM
CORNER RADIUS 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE 26 FLAT
BODY THICKNESS 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM
MATERIAL ALUMINUM ALLOY 2024
MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-250/5,T3 FED SPEC SINGLE MATERIAL RESPONSE
SURFACE TREATMENT CHROMATE ZINC
SECURING DEVICE TYPE THREADED FASTENER
MOUNTING OPENING SHAPE STYLE 1 UNTHREADED HOLE
HOLE DIAMETER 0.227 INCHES MINIMUM AND 0.234 INCHES MAXIMUM
FSC APPLICATION DATA FUSELAGE SECT,ACFT
MANUFACTURERS CODE 97499
DESIGN CONTROL REFERENCE 205-072-403-1

Restrictions/Controls & Freight Information | NSN 5340-00-067-8353

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Category Code Description
No Freight Information