Product Details | PACKING RETAINER

5330-01-317-6356 An item designed to fit over a packing gland by mating with a surface of a second part which together will retain into a narrow groove or confined space the PACKING, PREFORMED or O-RING, or an item designed to fit over a rod or shaft, to mate with a stuffing box to confine PACKING MATERIAL. It may function as a static or dynamic seal retainer with the packing located on, around, or in the centerline direction of the rod or shaft axis. It may have holes or joints for mounting, be threaded or unthreaded. See also PACKING NUT and PACKING NUT, STUFFING TUBE.

Part Alternates: 2146334, 5330-01-317-6356, 01-317-6356, 5330013176356, 013176356

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 03 APR 1990 01-317-6356

Demand History | NSN 5330-01-317-6356

Part Number Request Date QTY Origin
5330-01-317-6356 2009-02-36 15 DIBBS

Cross Reference | NSN 5330-01-317-6356

Part Number Cage Code Manufacturer
2146334 10001 NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-01-317-6356

Technical Data | NSN 5330-01-317-6356

Characteristic Specifications
MATERIAL STEEL COMP 1020 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT PHOSPHATE MANGANESE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION DOD-P-16232 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
CROSS-SECTIONAL HEIGHT 0.187 INCHES NOMINAL
BODY RECESS DEPTH 0.035 INCHES NOMINAL
CENTER HOLE DIAMETER 0.640 INCHES MINIMUM AND 0.645 INCHES MAXIMUM
PERIPHERAL DIAMETER 0.990 INCHES MINIMUM AND 0.995 INCHES MAXIMUM
ANGLE 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5330-01-317-6356

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 194130 WASHERS/GASKETS/MAINT I/C ENG
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 596 unknown
Originating Activity Code KZ Defense Supply Center Philadelphia
Philadelphia, PA 19101
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity E Engineer supplies, other than those listed under code B.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5330-01-317-6356

Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each