Product Details | NONMETALLIC ROUND SECTION SEAL

5330-01-104-2810 An item fabricated from nonmetallic material designed to be used where there is no relative motion between joined parts. Items with a solid cross section must be a single piece whose ends may have been secured together to form a specific shape. It may be formed to specific shape with or without joints. It may be a straight item of a specific length with end cuts or joints. It may have a solid or tubular cross section. Except for molded corners, end cuts, and mounting facilities such as mounting holes, slots, press-fit buttons, or the like, the item must be of one continuous round cross section. It may have fabric, cord or metal reinforcement. For straight items with square end cuts and without mounting holes, slots or press-fit buttons see RUBBER ROUND SECTION and TUBING, NONMETALLIC. Excludes GASKET and PACKING, PREFORMED.

Part Alternates: ZSP550229, ZSP5-502-29, 5330-01-104-2810, 01-104-2810, 5330011042810, 011042810

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 02 DEC 1980 01-104-2810

Drawings & Photos | NSN 5330-01-104-2810


Cross Reference | NSN 5330-01-104-2810

Part Number Cage Code Manufacturer
ZSP5-502-29 98376 ZERO MANUFACTURING, INC.

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-01-104-2810

Technical Data | NSN 5330-01-104-2810

Characteristic Specifications
MATERIAL RUBBER CHLOROPRENE CLASS CR OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION ASTM D735-59T,GR SC615B ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CONSTRUCTION SOLID
CROSS-SECTIONAL SHAPE STYLE G1 CIRCULAR
CROSS SECTION OUTSIDE DIAMETER 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
FABRICATION METHOD SOLID
STYLE DESIGNATOR A1 CIRCULAR
APERTURE DIAMETER 0.073 INCHES MINIMUM AND 0.093 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5330-01-104-2810

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 194120 WASHERS/GASKETS/PCKG DVCS NOI
Less than car load rating P 77.5
Less than truck load rating W Rating Variable
Water commodity Code 596 unknown
Originating Activity Code ZG Germany
ZH
ZJ
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable