Product Details | PACKING WITH RETAINER

5330-01-046-0660 An item composed of a compressible nonmetallic ring which may be loosely fitted into a noncompressible retaining ring, or may be of one piece construction with the compressible ring molded and/or mechanically connected to the retainer. It is specifically designed to form a fluid tight seal when compressed by a packing nut, gland, etc., between fixed surfaces and a cylindrical item passing through it. Excludes SEAL, PLAIN, ENCASED.

Part Alternates: 241210, 2412-10, 5330-01-046-0660, 01-046-0660, 5330010460660, 010460660

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 11 AUG 1977 01-046-0660

Cross Reference | NSN 5330-01-046-0660

Part Number Cage Code Manufacturer
2412-10 77969 RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD
2412-10 98159 RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-01-046-0660

Technical Data | NSN 5330-01-046-0660

Characteristic Specifications
MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER BUTADIENE-STYRENE CLASS SBR OR RUBBER CHLOROPRENE CLASS CR PACKING ALUMINUM ALLOY 7075 RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION MIL-R-6855 CL 1 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-R-6855 CL 3 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-R-6855 CL 2 MIL SPEC 3RD MATERIAL RESPONSE PACKING QQ-A-283 T6 FED SPEC SINGLE MATERIAL RESPONSE RETAINER
CONSTRUCTION ONE-PIECE
OUTSIDE DIAMETER 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM
RETAINER INSIDE DIAMETER 0.750 INCHES NOMINAL
PACKING INSIDE DIAMETER 0.607 INCHES MINIMUM AND 0.617 INCHES MAXIMUM
RETAINER THICKNESS 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM
PACKING RING CROSS-SECTIONAL DIAMETER 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM
MANUFACTURERS CODE 98159
DESIGN CONTROL REFERENCE 2412-10

Restrictions/Controls & Freight Information | NSN 5330-01-046-0660

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 194120 WASHERS/GASKETS/PCKG DVCS NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 596 unknown
Originating Activity Code KZ Defense Supply Center Philadelphia
Philadelphia, PA 19101
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity B Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5330-01-046-0660

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALC
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesYTERMINAL ITEM #(NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative