Product Details | NONMETALLIC SPECIAL SHAPED SECTION SEAL

5330-00-839-6251 An item fabricated from NONMETALLIC SPECIAL SHAPED SECTION. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes BUSHING, NONMETALLIC; PACKING, PERFORMED; PAD, CUSHIONING;and SEAL, PLAIN. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see NONMETALLIC SPECIAL SHAPED SECTION.

Part Alternates: 620508 , 9144603, 5330-00-839-6251, 00-839-6251, 5330008396251, 008396251

Hardware and Abrasives | Packing and Gasket Materials

Supply Group (FSG) NSN Assign. NIIN
53 01 JAN 1962 00-839-6251

Drawings & Photos | NSN 5330-00-839-6251


Cross Reference | NSN 5330-00-839-6251

Part Number Cage Code Manufacturer
9144603 18876 U S ARMY AVIATION AND MISSILE COMMAND

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5330-00-839-6251

Technical Data | NSN 5330-00-839-6251

Characteristic Specifications
MATERIAL RUBBER CHLOROPRENE CLASS CR OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION 417,GR SC515ABF3 MIL STD SINGLE MATERIAL RESPONSE OVERALL
CONSTRUCTION SOLID
CROSS-SECTIONAL SHAPE STYLE H123 SPECIAL
CROSS SECTION INSIDE DIAMETER 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
CROSS-SECTIONAL THICKNESS 0.078 INCHES MINIMUM AND 0.109 INCHES MAXIMUM
CROSS-SECTIONAL HEIGHT 0.375 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
CROSS-SECTIONAL WIDTH 0.797 INCHES MINIMUM AND 0.828 INCHES MAXIMUM
FABRICATION METHOD SOLID
STYLE DESIGNATOR A4A NON-CIRCULAR
APERTURE WIDTH 16.880 INCHES MINIMUM AND 16.920 INCHES MAXIMUM
APERTURE LENGTH 22.820 INCHES MINIMUM AND 22.860 INCHES MAXIMUM
MANUFACTURERS CODE 18876
DESIGN CONTROL REFERENCE 9144603

Restrictions/Controls & Freight Information | NSN 5330-00-839-6251

Category Code Description
Hazardous Material Indicator CodePThere is no information in the HMIS; however, the NSN is in an FSC in Table II of Federal Standard 313 and an MSDS may be required by the user. The requirement for an MSDS is dependent on a hazard determination of the supplier or the intended end use of the product
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 061045 BOARDS PRINTED CIRCUIT ELEC
Less than car load rating M 85
Less than truck load rating W Rating Variable
Water commodity Code 72D unknown
Originating Activity Code SU Ogden Air Logistics Center
Hill AFB, UT 84056-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity H Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo 3 Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).