Product Details | FLAT WASHER

5310-01-607-7812 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: BACW10BN72AP , 5310-01-607-7812, 01-607-7812, 5310016077812, 016077812

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG) NSN Assign. NIIN
53 2012166 01-607-7812

Demand History | NSN 5310-01-607-7812

Part Number Request Date QTY Origin
BACW10BN72AP 2023-10-278 295 DIBBS
BACW10BN72AP 2023-10-278 333 DIBBS
5310-01-607-7812 2016-03-90 1645 DIBBS
5310-01-607-7812 2016-02-35 924 DIBBS
5310-01-607-7812 2015-04-99 532 DIBBS
5310-01-607-7812 2014-08-225 5000 DIBBS
5310-01-607-7812 2014-04-111 124 DIBBS
5310-01-607-7812 2014-04-98 124 DIBBS
5310-01-607-7812 2014-01-30 42 DIBBS
5310-01-607-7812 2014-01-15 42 DIBBS
5310-01-607-7812 2013-11-310 42 DIBBS
5310-01-607-7812 2013-10-295 42 DIBBS
5310-01-607-7812 2013-08-242 42 DIBBS
5310-01-607-7812 2013-06-156 42 DIBBS
BACW10BN72AP 2013-01-14 120 US
BACW10BN72AP 2013-01-03 120 US
5310-01-607-7812 2012-10-277 45 DIBBS
5310-01-607-7812 2012-09-256 45 DIBBS
5310-01-607-7812 2012-08-235 45 DIBBS

Cross Reference | NSN 5310-01-607-7812

Part Number Cage Code Manufacturer
BACW10BN72AP 08073 MAMCO MFG CO INC
BACW10BN72AP 09772 WEST COAST LOCKWASHER CO., INC. DBA WCL COMPANY
BACW10BN72AP 10630 ANILLO INDUSTRIES, INC. DBA ANILLO INDUSTRIES
BACW10BN72AP 56878 SPS TECHNOLOGIES, LLC DBA AEROSPACE DIVISION
BACW10BN72AP 58009 MOELLER MANUFACTURING & SUPPLY INC.
BACW10BN72AP 82918 THE BOEING COMPANY DBA BOEING

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5310-01-607-7812

Restrictions/Controls & Freight Information | NSN 5310-01-607-7812

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 194160 WASHER OR GASKETS, IRON OR STEEL,
Less than car load rating
Less than truck load rating U 50.0
Water commodity Code 713 unknown
Originating Activity Code SX Oklahoma City Air Logistics Center
Tinker AFB, OK 73145-3043
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5310-01-607-7812

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each