Product Details | FLAT WASHER

5310-01-568-2355 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: 12505345, 5310-01-568-2355, 01-568-2355, 5310015682355, 015682355

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG) NSN Assign. NIIN
53 23 OCT 2008 01-568-2355

Cross Reference | NSN 5310-01-568-2355

Part Number Cage Code Manufacturer
12505345 19207 U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5310-01-568-2355

Technical Data | NSN 5310-01-568-2355

Characteristic Specifications
PERIPHERAL SHAPE STYLE RECTANGULAR
HOLE DIAMETER 8.5 MILLIMETERS NOMINAL
END CUT ANGLE 45.0 DEGREES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION 19207 12420325 METHOD 1 OR 4 MFR REF SINGLE TREATMENT RESPONSE OVERALL
THICKNESS 1.5 MILLIMETERS NOMINAL
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
MATERIAL STEEL COMP 1008 OVERALL
WIDTH ACROSS FLATS 18.5 MILLIMETERS NOMINAL
CENTER HOLE SHAPE STYLE ROUND
LENGTH 25.4 MILLIMETERS NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION ASTM A1008/A1008M, SHEET. COLD ROLLED (14 GA) ASSN STD SINGLE MATERIAL RESPONSE OVERALL
END ITEM IDENTIFICATION 2320-01-549-8565,TRUCK,CARGO
PART NAME ASSIGNED BY CONTROLLING AGENCY WASHER, EAD
SURFACE TREATMENT PAINT OVERALL

Restrictions/Controls & Freight Information | NSN 5310-01-568-2355

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Electro-static Discharge Susceptible:ANo known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 194160 WASHER OR GASKETS, IRON OR STEEL,
Less than car load rating
Less than truck load rating U 50.0
Water commodity Code 713 unknown
Originating Activity Code AZ U.S. Army Tank-Automotive and Armaments
Command
Warren, MI 48397-5000
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity V Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5310-01-568-2355

Category Code Description
Materiel Category and Inventory ManagerT Industrial Supplies (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesJNOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative