NSN 5310-01-469-9193 1-13/16ID X 2-3 /4OD X 1/4THK, 11316IDX234ODX14THK, 124-4322648 PC 19

5310-01-469-9193 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: 1-13/16ID X 2-3 /4OD X 1/4THK, 11316IDX234ODX14THK, 124-4322648 PC 19, 1244322648PC19, 124-4322649 PC 41, 1244322649PC41, 124-4322651 PC 41, 1244322651PC41, 124-4322652 PC 41, 1244322652PC41, 124-4365872 PC 33, 1244365872PC33, 124-4366739 PC 36, 1244366739PC36, 124-4367407 PC 18, 1244367407PC18, 124-5200227 PC 11, 1245200227PC11, 124-5202449 PC 17, 1245202449PC17, 124-5588671 PC 16, 1245588671PC16, 124-5589896 PC 33, 1245589896PC33, 124-5589897 PC 28, 1245589897PC28, 124-5589899 PC 18, 1245589899PC18, 124-6293626 PC 34, 1246293626PC34, 124-6294787 PC 34, 1246294787PC34, 5200227, 5310-01-469-9193, 01-469-9193, 5310014699193, 014699193

Hardware and Abrasives | Nuts and Washers