NSN 5310-01-385-4499 ASNA2397JD10LL, NAS1149D0316J, NAS1149D0316L

Product Details | FLAT WASHER

5310-01-385-4499 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: ASNA2397JD10LL, NAS1149D0316J, NAS1149D0316L, 10122276 , 5310-01-385-4499, 01-385-4499, 5310013854499, 013854499

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG)	NSN Assign.	NIIN	Item Name Code (INC)
53	12 JAN 1994	01-385-4499	13393 ( WASHER, FLAT )

Drawings & Photos | NSN 5310-01-385-4499

Part Number	Request Date	QTY	Origin
NAS1149D0316J	2025-04-99	26	US
NAS1149D0316J	2025-01-31	43	United States
NAS1149D0316J	2024-10-281	58	United Kingdom
NAS1149D0316J	2024-09-267	1205	us
5310-01-385-4499	2023-07-193	30	Spain
ASNA2397JD10LL	2022-11-314	200	ZA
5310-01-385-4499	2022-10-300	15	US
NAS1149D0316J	2022-01-11	40	Malta
NAS1149D0316J	2021-08-225	1550	United States
NAS1149D0316J	2021-03-75	392	AE
NAS1149D0316J	2021-03-71	392	US
5310-01-385-4499	2021-02-42	100	United States
5310-01-385-4499	2021-01-12	30	United States
5310-01-385-4499	2020-10-280	100	MANUAL
NAS1149D0316J	2020-10-280	100	SA
ASNA2397JD10LL	2020-05-139	50	HU
ASNA2397JD10LL	2020-05-139	50	US
5310-01-385-4499	2020-04-107	50	United States
NAS1149D0316J	2020-02-45	10	United States
5310-01-385-4499	2019-10-294	20	United States
5310-01-385-4499	2019-02-35	100	United States
NAS1149D0316J	2018-11-316	50	United States
NAS1149D0316J	2018-11-306	500	United States
NAS1149D0316L	2018-09-271	5000	US
NAS1149D0316J	2018-09-253	20	United States
5310-01-385-4499	2018-06-173	1	DIBBS-RFPs
5310-01-385-4499	2018-02-47	20	United States
5310-01-385-4499	2018-02-44	20	United States
5310-01-385-4499	2018-02-32	20	United States
NAS1149D0316J	2017-06-167	15	United States
NAS1149D0316J	2017-04-110	4392	US
NAS1149D0316J	2017-03-89	100	Korea
NAS1149D0316J	2016-12-348	5852	US
NAS1149D0316J	2016-09-270	22	Korea
NAS1149D0316J	2016-08-236	100	Canada
NAS1149D0316J	2016-08-214	100	US
NAS1149D0316J	2016-03-91	21	Spain
NAS1149D0316J	2015-08-224	2	US
NAS1149D0316J	2015-05-141	200	United States
NAS1149D0316J	2015-03-61	10	US
NAS1149D0316J	2015-01-07	1	US
NAS1149D0316J	2014-12-356	8	United States
NAS1149D0316J	2014-11-330	50	United States
NAS1149D0316J	2014-11-330	100	United States
NAS1149D0316J	2014-11-330	500	United States
NAS1149D0316J	2014-11-311	630	United States
NAS1149D0316J	2014-08-241	16	United States
NAS1149D0316J	2014-01-02	2960	US
NAS1149D0316J	2013-12-336	53	US
NAS1149D0316J	2013-12-336	53	US
NAS1149D0316J	2013-10-288	6	United States
NAS1149D0316J	2013-09-266	24	us
NAS1149D0316J	2013-09-244	1	DE
5310-01-385-4499	2013-08-240	215682	DIBBS
NAS1149D0316J	2013-07-205	70	Singapore
NAS1149D0316J	2013-07-183	0	United States
5310-01-385-4499	2013-02-51	2	US
5310-01-385-4499	2013-02-44	2	US
NAS1149D0316J	2011-08-238	170	Australia
NAS1149D0316J	2011-04-104	500	ES
5310-01-385-4499	2011-03-87	30	United States
NAS1149D0316J	2010-08-236	4000	Italy
NAS1149D0316J	2010-06-166	500	United States
NAS1149D0316J	2010-02-40	300	United States
5310-01-385-4499	2009-10-281	100	India
5310-01-385-4499	2009-10-281	100	India
NAS1149D0316J	2009-09-245	100	US
NAS1149D0316J	2009-04-93	1000	Turkey
NAS1149D0316J	2008-08-240	60	United States
5310-01-385-4499	2008-04-114	81478	DIBBS
NAS1149D0316J	2008-01-18	10	United States
NAS1149D0316J	2008-01-10	200	United States
NAS1149D0316J	2008-01-08	75	us
NAS1149D0316J	2006-08-242	576	France

Cross Reference | NSN 5310-01-385-4499

Part Number	Cage Code	Manufacturer
NAS1149D0316J	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES
NAS1149D0316L	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES

Request a Quote

What Our Customers Say

Thank you very much for the excellent service and professional customer care.

Ernie G. Honeywell

The service was excellent. I can think of no improvements to date that you can make regarding internet sales.

John L. Raytheon

The representative for WBParts was efficient & handled our request in a timely & professional manner.

Karen G. General Dynamics

Tried two other sources, neither of them responded, was all done online, never spoke to anyone.

Rex S. US Airforce

The response is quick and the price is often very good. We are completely satisfied.

Patricia S. NASA

Compare

NSNs for Compare ( up to 4 ): Add 5310-01-385-4499

Compare

Related Products | NSN 5310-01-385-4499

5310-01-385-4536, 5310-01-385-4624, 5310-01-385-4658, 5310-01-385-4679, 5310-01-385-4738

Technical Data | NSN 5310-01-385-4499

Characteristic	Specifications
MATERIAL	ALUMINUM ALLOY 2024 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/5, FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER	0.198 INCHES MINIMUM AND 0.213 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE	1 ROUND
OVERALL DIAMETER	0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE	1 ROUND
CROSS-SECTIONAL SHAPE STYLE	1 RECTANGULAR
THICKNESS	0.014 INCHES MINIMUM AND 0.018 INCHES MAXIMUM

Restrictions/Controls & Freight Information | NSN 5310-01-385-4499

Restrictions
Freight

Category	Code	Description
Shelf-Life Code:	0	Nondeteriorative
Hazardous Material Indicator Code	N	There is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:	A	Non-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:	U	UNCLASSIFIED
Precious Metals Indicator Code:	A	Item does not contain precious metal
Criticality Code:	X	The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:	0	Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)

Category	Code	Description
NMF Description	093490	BOLT/NUT/SCREW/CLIPS/FASTENER/ETC
Less than car load rating
Less than truck load rating	U	50.0
Water commodity Code	713	unknown
Originating Activity Code	KH	Defense Industrial Supply Center Philadelphia, PA 19111
Air Dimension Code	A	Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity	B	Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling	Z	No special handling required.
Special Handling Code	9	unknonwn
HAZMAT
Type of Cargo	Z	No special type of cargo code applicable

Management | NSN 5310-01-385-4499

Category	Code	Description
Materiel Category and Inventory Manager	T	Industrial Supplies (DLA/GSA Items)
Appropriation and Budget Activity	2	Stock Fund Secondary Items
Management Inventory Segment	2	NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code	0	Medical Materiel
Weapons Systems/End Item or Homogeneous Group	00	DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements Code	X	Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DA	Department of the Army
Service Organization	A	U.S. Army
Reparability	Z	This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice Codes	D	DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	Q EA : Each

Category	Code	Description
Budget Code	9	General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price Validation	N	The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM. The price has not been analyzed or reviewed for accuracy. ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund Code	SF	Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation Code	SX	SX:AF SICA RESIDUAL MMAC-OC-ALC
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DF	Department of the Air Force
Service Organization	F	U.S. Air Force
Reparability	N	Stock Fund (except Munitions)
Acquisition Advice Codes	D	DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	Q EA : Each

Category	Code	Description
Stores Account Code	1	Marine Corps Stock Fund Account Item.
Combat Essentiality Code	5	Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management Code	B	All CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code	2	ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DM	U.S. Marine Corps
Service Organization	M	U.S. Marine Corps
Reparability	Z	Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice Codes	D	DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	Q EA : Each

Category	Code	Description
Cognizance Codes	9B	Navy-owned stocks of DLA material Naval Inventory Control Point, Mechanicsburg
Source of Supply	SMS	Defense Logistics Agency Enterprise Business Systems
Agency	DN	Department of the Navy
Service Organization	N	U.S. Navy
Acquisition Advice Codes	D	DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item Code	U	UNCLASSIFIED
Shelf Life Code	0	Nondeteriorative
Purchasing	QTY UOM	Q EA : Each