Product Details | FLAT WASHER

5310-01-317-0477 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: V7288, V7288CP, V-7445 PIECE 6, V-7445 PIECE 6CP, V7445PIECE6, V7445PIECE6CP, 5310-01-317-0477, 01-317-0477, 5310013170477, 013170477

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG) NSN Assign. NIIN
53 01-317-0477

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5310-01-317-0477

Technical Data | NSN 5310-01-317-0477

Characteristic Specifications
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS CLEANING AND PACKAGING PER MIL-STD-1330D
CRITICALITY CODE JUSTIFICATION ZZZY
III END ITEM IDENTIFICATION .25IPS BALL VALVE
MANUFACTURERS CODE 03670
DESIGN CONTROL REFERENCE V-7445 PIECE 6

Restrictions/Controls & Freight Information | NSN 5310-01-317-0477

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Category Code Description
No Freight Information