Product Details | FLAT WASHER

5310-01-151-5849 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: 68A4509142001, 68A450914-2001, 5310-01-151-5849, 01-151-5849, 5310011515849, 011515849

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG) NSN Assign. NIIN
53 20 APR 1983 01-151-5849

Drawings & Photos | NSN 5310-01-151-5849


Demand History | NSN 5310-01-151-5849

Part Number Request Date QTY Origin
5310-01-151-5849 2016-10-279 19 DIBBS
5310-01-151-5849 2016-08-227 19 DIBBS
5310-01-151-5849 2016-05-140 16 DIBBS
5310-01-151-5849 2016-05-139 15 DIBBS
5310-01-151-5849 2016-05-132 16 DIBBS
5310-01-151-5849 2016-05-131 15 DIBBS
5310-01-151-5849 2016-02-60 48 DIBBS
5310-01-151-5849 2016-02-55 17 DIBBS
5310-01-151-5849 2016-01-05 17 DIBBS
5310-01-151-5849 2015-09-270 32 DIBBS
5310-01-151-5849 2015-07-190 13 DIBBS

Cross Reference | NSN 5310-01-151-5849

Part Number Cage Code Manufacturer
68A450914-2001 76301 BOEING COMPANY, THE DBA BOEING

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5310-01-151-5849

Technical Data | NSN 5310-01-151-5849

Characteristic Specifications
MATERIAL STEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION MIL-S-5059 COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT PASSIVATE OVERALL
PERIPHERAL SHAPE STYLE 8 OVAL
WIDTH 1.115 INCHES NOMINAL
RADIUS AT SMALL END 0.096 INCHES NOMINAL
LENGTH 1.320 INCHES NOMINAL
CENTER HOLE SHAPE STYLE 5 RECTANGULAR
CENTER HOLE LENGTH 0.564 INCHES MINIMUM AND 0.574 INCHES MAXIMUM
CENTER HOLE WIDTH 0.438 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
CROSS-SECTIONAL SHAPE STYLE 1 RECTANGULAR
THICKNESS 0.062 INCHES NOMINAL
SPECIAL FEATURES 0.062 DIA.HOLE LOCATED ON SMALL END
MANUFACTURERS CODE 76301
DESIGN CONTROL REFERENCE 68A450914-2001

Restrictions/Controls & Freight Information | NSN 5310-01-151-5849

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 095190 HARDWARE, NOI SUB 9
Less than car load rating Q 70
Less than truck load rating Q 70.0
Water commodity Code 713 unknown
Originating Activity Code SU Ogden Air Logistics Center
Hill AFB, UT 84056-5609
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5310-01-151-5849

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Materiel Management Aggregation CodeLESU:LANDING GEAR SYSTEMS AND COMPONENTS
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
EA : Each