Product Details | FLAT WASHER

5310-01-133-7235 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: 5310-01-133-7235, 01-133-7235, 5310011337235, 011337235

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG) NSN Assign. NIIN
53 01-133-7235

Drawings & Photos | NSN 5310-01-133-7235


Cross Reference | NSN 5310-01-133-7235

Part Number Cage Code Manufacturer
50-7N6-6-5 38597 LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
GW10U23AA3 26512 NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE
GW10UA23AA3 26512 NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE
SP4300-159 26512 NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5310-01-133-7235

Technical Data | NSN 5310-01-133-7235

Characteristic Specifications
MATERIAL ALUMINUM ALLOY 2014 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-250/3,T6 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-225/4,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT ANODIZE OR CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION MIL-A-8625 TYPE 2 CLASS 3 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 CLASS 1A MIL SPEC 2ND TREATMENT RESPONSE OR MIL-C-5541 CLASS 3 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
HOLE DIAMETER 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE 1 ROUND
OVERALL DIAMETER 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE 1 ROUND
CROSS-SECTIONAL SHAPE STYLE 1 RECTANGULAR
THICKNESS 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM
MANUFACTURERS CODE 26512
DESIGN CONTROL REFERENCE GW10U23AA3

Restrictions/Controls & Freight Information | NSN 5310-01-133-7235

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Category Code Description
No Freight Information