Product Details | FLAT WASHER

5310-01-102-9865 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: 3V3308, 3V-3308, 5310-01-102-9865, 01-102-9865, 5310011029865, 011029865

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG) NSN Assign. NIIN
53 01 NOV 1980 01-102-9865

Drawings & Photos | NSN 5310-01-102-9865


Demand History | NSN 5310-01-102-9865

Part Number Request Date QTY Origin
3V-3308 2024-02-37 1174 DIBBS
6V-5839 2024-02-37 1174 DIBBS
3V-3308 2024-01-04 991 DIBBS
6V-5839 2024-01-04 991 DIBBS
3V-3308 2023-11-325 1081 DIBBS
6V-5839 2023-11-325 1081 DIBBS
3V-3308 2023-09-271 1 DIBBS
6V-5839 2023-09-271 1 DIBBS
3V-3308 2023-09-256 2 DIBBS
6V-5839 2023-09-256 2 DIBBS
3V-3308 2023-07-200 12 DIBBS
3V-3308 2023-07-200 300 DIBBS
6V-5839 2023-07-200 12 DIBBS
6V-5839 2023-07-200 300 DIBBS
3V-3308 2023-06-165 6 DIBBS
3V-3308 2023-06-165 10 DIBBS
3V-3308 2023-06-165 100 DIBBS
6V-5839 2023-06-165 6 DIBBS
6V-5839 2023-06-165 10 DIBBS
6V-5839 2023-06-165 100 DIBBS
3V-3308 2023-06-162 12 DIBBS
6V-5839 2023-06-162 12 DIBBS
3V-3308 2023-06-156 12 DIBBS
6V-5839 2023-06-156 12 DIBBS
3V-3308 2023-04-103 100 DIBBS
6V-5839 2023-04-103 100 DIBBS
3V-3308 2023-03-64 10 DIBBS
6V-5839 2023-03-64 10 DIBBS
3V-3308 2023-02-33 100 DIBBS
6V-5839 2023-02-33 100 DIBBS
3V-3308 2023-01-22 28 DIBBS
6V-5839 2023-01-22 28 DIBBS
3V-3308 2023-01-11 13 DIBBS
6V-5839 2023-01-11 13 DIBBS
3V-3308 2022-12-340 14 DIBBS
6V-5839 2022-12-340 14 DIBBS
3V-3308 2022-11-319 12 DIBBS
6V-5839 2022-11-319 12 DIBBS
3V-3308 2022-11-306 12 DIBBS
3V-3308 2022-11-306 100 DIBBS
6V-5839 2022-11-306 12 DIBBS
6V-5839 2022-11-306 100 DIBBS
3V-3308 2022-08-234 12 DIBBS
3V-3308 2022-08-234 30 DIBBS
6V-5839 2022-08-234 12 DIBBS
6V-5839 2022-08-234 30 DIBBS
3V-3308 2022-06-156 16 DIBBS
6V-5839 2022-06-156 16 DIBBS
3V-3308 2022-05-151 200 DIBBS
6V-5839 2022-05-151 200 DIBBS
3V-3308 2022-03-82 2 DIBBS
6V-5839 2022-03-82 2 DIBBS
3V-3308 2022-03-74 1 DIBBS
6V-5839 2022-03-74 1 DIBBS
3V-3308 2022-03-69 8 DIBBS
6V-5839 2022-03-69 8 DIBBS
3V-3308 2022-02-53 100 DIBBS
6V-5839 2022-02-53 100 DIBBS
3V3308 2022-01-02 13 DIBBS
3V-3308 2022-01-02 13 DIBBS
3V3308 2021-12-340 100 DIBBS
3V-3308 2021-12-340 100 DIBBS
3V3308 2021-12-336 11 DIBBS
3V-3308 2021-12-336 11 DIBBS
3V3308 2021-11-308 4 DIBBS
3V-3308 2021-11-308 4 DIBBS
3V3308 2020-11-329 6 US
5310-01-102-9865 2018-07-203 7 DIBBS
5310-01-102-9865 2018-07-197 18 DIBBS
5310-01-102-9865 2018-06-176 8 DIBBS
5310-01-102-9865 2018-05-149 10 DIBBS
5310-01-102-9865 2018-05-140 25 DIBBS
5310-01-102-9865 2018-03-80 1 DIBBS
5310-01-102-9865 2018-03-70 7 DIBBS
5310-01-102-9865 2018-02-57 2 DIBBS
5310-01-102-9865 2018-02-46 3 DIBBS
5310-01-102-9865 2017-12-339 1 DIBBS
5310-01-102-9865 2017-11-318 11 DIBBS
5310-01-102-9865 2017-11-318 16 DIBBS
5310-01-102-9865 2017-11-305 14 DIBBS
5310-01-102-9865 2017-11-305 100 DIBBS
5310-01-102-9865 2017-10-289 2 DIBBS
5310-01-102-9865 2017-07-207 5 DIBBS
5310-01-102-9865 2017-07-191 5 DIBBS
5310-01-102-9865 2017-06-171 3 DIBBS
5310-01-102-9865 2017-05-129 100 DIBBS
5310-01-102-9865 2017-03-67 3 DIBBS
5310-01-102-9865 2017-03-67 100 DIBBS
5310-01-102-9865 2016-02-33 10 DIBBS
5310-01-102-9865 2015-12-362 20 DIBBS
5310-01-102-9865 2015-10-294 48 DIBBS
5310-01-102-9865 2015-08-221 100 DIBBS
5310-01-102-9865 2015-07-193 5 DIBBS
5310-01-102-9865 2015-07-190 306 DIBBS
5310-01-102-9865 2014-07-183 2273 DIBBS
5310-01-102-9865 2014-03-79 6 DIBBS
5310-01-102-9865 2011-09-260 10 DIBBS
5310-01-102-9865 2011-03-69 40 DIBBS
5310-01-102-9865 2010-11-326 10 DIBBS
5310-01-102-9865 2010-11-323 16 DIBBS
5310-01-102-9865 2010-11-315 32 DIBBS
3V3308 2010-10-277 50 US
5310-01-102-9865 2009-04-99 8 DIBBS

Cross Reference | NSN 5310-01-102-9865

Part Number Cage Code Manufacturer
3V-3308 0141B NAVANTIA SA
3V-3308 409BB NAVANTIA - PROPULSION Y ENERGIAMOTORES - CARTAGENA
3V3308 11083 CATERPILLAR INC. DBA CATERPILLAR

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5310-01-102-9865

Technical Data | NSN 5310-01-102-9865

Characteristic Specifications
MATERIAL STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION 1E2174,FSCM 11083 MFR REF SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER 10.2 MILLIMETERS NOMINAL
PERIPHERAL SHAPE STYLE 1 ROUND
OVERALL DIAMETER 20.5 MILLIMETERS NOMINAL
CENTER HOLE SHAPE STYLE 1 ROUND
CROSS-SECTIONAL SHAPE STYLE 1 RECTANGULAR
THICKNESS 2.5 MILLIMETERS NOMINAL
III HEAT TREATMENT FULL HARD

Restrictions/Controls & Freight Information | NSN 5310-01-102-9865

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Category Code Description
NMF Description 194160 WASHER OR GASKETS, IRON OR STEEL,
Less than car load rating
Less than truck load rating U 50.0
Water commodity Code 713 unknown
Originating Activity Code KZ Defense Supply Center Philadelphia
Philadelphia, PA 19101
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity B Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5310-01-102-9865

Category Code Description
Materiel Category and Inventory ManagerT Industrial Supplies (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesHDIRECT DELIVERY UNDER A CENTRAL CONTRACT # (VENDOR STOCKED) Issue, transfer or shipment is not subject to specialized controls other than those imposed by IMM/Service/Agency supply policy. 1. The item is centrally managed and procured. 2. Normal issue is by direct shipment from the vendor to the user at the order of the ICP or IMM. However, orders may be shipped from stock by ICP or IMM distribution facilities when the vendor's minimum order quantity is not met, or when stocks are being drawn down. 3. Requisitions and fund citations will be submitted in accordance with IMM/Service/Agency Requisitioning Procedures. 4. Generally delivery will be made within applicable Service/Agency guidelines addressing customer required timeframe.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
Q
EA : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALC
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesHDIRECT DELIVERY UNDER A CENTRAL CONTRACT # (VENDOR STOCKED) Issue, transfer or shipment is not subject to specialized controls other than those imposed by IMM/Service/Agency supply policy. 1. The item is centrally managed and procured. 2. Normal issue is by direct shipment from the vendor to the user at the order of the ICP or IMM. However, orders may be shipped from stock by ICP or IMM distribution facilities when the vendor's minimum order quantity is not met, or when stocks are being drawn down. 3. Requisitions and fund citations will be submitted in accordance with IMM/Service/Agency Requisitioning Procedures. 4. Generally delivery will be made within applicable Service/Agency guidelines addressing customer required timeframe.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
Q
EA : Each
Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code2Non-Critical Repair Part. Repair parts or major components whose failure in an end item will not render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency, and which do not fit the definition of Code 3 or 4 items.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesHDIRECT DELIVERY UNDER A CENTRAL CONTRACT # (VENDOR STOCKED) Issue, transfer or shipment is not subject to specialized controls other than those imposed by IMM/Service/Agency supply policy. 1. The item is centrally managed and procured. 2. Normal issue is by direct shipment from the vendor to the user at the order of the ICP or IMM. However, orders may be shipped from stock by ICP or IMM distribution facilities when the vendor's minimum order quantity is not met, or when stocks are being drawn down. 3. Requisitions and fund citations will be submitted in accordance with IMM/Service/Agency Requisitioning Procedures. 4. Generally delivery will be made within applicable Service/Agency guidelines addressing customer required timeframe.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
Q
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesHDIRECT DELIVERY UNDER A CENTRAL CONTRACT # (VENDOR STOCKED) Issue, transfer or shipment is not subject to specialized controls other than those imposed by IMM/Service/Agency supply policy. 1. The item is centrally managed and procured. 2. Normal issue is by direct shipment from the vendor to the user at the order of the ICP or IMM. However, orders may be shipped from stock by ICP or IMM distribution facilities when the vendor's minimum order quantity is not met, or when stocks are being drawn down. 3. Requisitions and fund citations will be submitted in accordance with IMM/Service/Agency Requisitioning Procedures. 4. Generally delivery will be made within applicable Service/Agency guidelines addressing customer required timeframe.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
Q
EA : Each