Product Details | FLAT WASHER

5310-01-017-7266 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: 5310-01-017-7266, 01-017-7266, 5310010177266, 010177266

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG) NSN Assign. NIIN
53 01-017-7266

Drawings & Photos | NSN 5310-01-017-7266


Cross Reference | NSN 5310-01-017-7266

Part Number Cage Code Manufacturer
2W1-48-36-63 43999 BOEING COMPANY, THE DBA BOEING
AL1256-25 08484 BREEZE-EASTERN CORPORATION
WA721032 01843 AMBAC INTERNATIONAL CORPORATION
WA721032 54936 HAYNES CORPORATION
WA721032 D9182 BOSCH REXROTH GMBH LOHMANN +STOLTERFOHT

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5310-01-017-7266

Technical Data | NSN 5310-01-017-7266

Characteristic Specifications
MATERIAL STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION QQ-S-698 COND CR TEMPER 1/2 HARD FINISH 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE DIAMETER 0.751 INCHES MINIMUM AND 0.754 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE 1 ROUND
OVERALL DIAMETER 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE 1 ROUND
CROSS-SECTIONAL SHAPE STYLE 1 RECTANGULAR
THICKNESS 0.060 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
MANUFACTURERS CODE 08484
DESIGN CONTROL REFERENCE AL1256-25

Restrictions/Controls & Freight Information | NSN 5310-01-017-7266

Category Code Description
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Category Code Description
No Freight Information