Product Details | FLAT WASHER

5310-00-947-5179 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: 64A98B794, 64A98B79-4, 65C3529111, 65C35291-11, 5310-00-947-5179, 00-947-5179, 5310009475179, 009475179

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG) NSN Assign. NIIN
53 01 APR 1966 00-947-5179

Drawings & Photos | NSN 5310-00-947-5179


Demand History | NSN 5310-00-947-5179

Part Number Request Date QTY Origin
5310-00-947-5179 2021-11-305 149 DIBBS
5310-00-947-5179 2021-10-292 149 DIBBS
5310-00-947-5179 2021-10-285 146 DIBBS
5310-00-947-5179 2021-09-272 3 DIBBS
5310-00-947-5179 2021-09-272 13 DIBBS
5310-00-947-5179 2021-09-272 146 DIBBS
65C35291-11 2021-01-04 88 DIBBS
65C35291-11 2020-12-362 88 DIBBS
65C35291-11 2020-05-134 84 DIBBS
65C35291-11 2020-05-126 84 DIBBS
5310-00-947-5179 2017-04-102 157 DIBBS
5310-00-947-5179 2017-02-43 157 DIBBS
5310-00-947-5179 2016-12-353 161 DIBBS
5310-00-947-5179 2013-12-345 193 DIBBS
5310-00-947-5179 2013-11-308 193 DIBBS
5310-00-947-5179 2011-12-350 143 DIBBS
5310-00-947-5179 2011-08-213 82 DIBBS
5310-00-947-5179 2011-02-33 32 DIBBS
5310-00-947-5179 2010-01-19 24 DIBBS
5310-00-947-5179 2009-05-140 9 DIBBS
5310-00-947-5179 2009-02-56 18 DIBBS
5310-00-947-5179 2008-11-317 12 DIBBS

Cross Reference | NSN 5310-00-947-5179

Part Number Cage Code Manufacturer
64A98B79-4 10001 NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT
64A98B79-4 11201 DEVAL CORPORATION
65C35291-11 0ZLV2 GSE SPARES, INC.
65C35291-11 98296 STANDARD MFG CO INC

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5310-00-947-5179

Technical Data | NSN 5310-00-947-5179

Characteristic Specifications
MATERIAL COPPER ALLOY 268 OR COPPER ALLOY 260 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION QQ-B-613 FED SPEC ALL MATERIAL RESPONSES OVERALL
HOLE DIAMETER 1.312 INCHES NOMINAL
PERIPHERAL SHAPE STYLE 1 ROUND
OVERALL DIAMETER 2.250 INCHES NOMINAL
CENTER HOLE SHAPE STYLE 1 ROUND
CROSS-SECTIONAL SHAPE STYLE 1 RECTANGULAR
THICKNESS 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SURFACE FINISH 63.0 MICROINCHES TOP 63.0 MICROINCHES BOTTOM
MANUFACTURERS CODE 10001
DESIGN CONTROL REFERENCE 64A98B79-4

Restrictions/Controls & Freight Information | NSN 5310-00-947-5179

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:AItem does not contain precious metal
Criticality Code:X The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Automatic Data Processing Equipment:0Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
Category Code Description
NMF Description 194120 WASHERS/GASKETS/PCKG DVCS NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 713 unknown
Originating Activity Code SG 403 SCMS/GUED
5215 Thurlow St, Suite 5, Bldg 70C
Wright-Patterson AFB OH 45433
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity B Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5310-00-947-5179

Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Price ValidationN The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
  • The price has not been analyzed or reviewed for accuracy.
  • ZOP or Standard price challenges are permissible, but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ?L? or?F?,the case must be evaluated locally where purchased or fabricated.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALC
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
A
EA : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesZINSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM # Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
A
EA : Each