Product Details | FLAT WASHER

5310-00-851-0913 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Part Alternates: AN960D10, NAS1149D0363H, 10335589 , 5310-00-851-0913, 00-851-0913, 5310008510913, 008510913

Hardware and Abrasives | Nuts and Washers

Supply Group (FSG) NSN Assign. NIIN
53 01 JAN 1962 00-851-0913

Drawings & Photos | NSN 5310-00-851-0913


Demand History | NSN 5310-00-851-0913

Part Number Request Date QTY Origin
AN960D10 2025-04-111 3 United States
AN960D10 2024-04-113 3 United States
5310-00-851-0913 2024-03-88 11000 DIBBS
AN960D10 2024-01-24 4 United States
5310-00-851-0913 2023-08-236 200 US
AN960D10 2023-03-74 1 Singapore
NAS1149D0363H 2021-08-215 1 Malaysia
NAS1149D0363H 2021-06-159 200 Malaysia
5310-00-851-0913 2021-05-133 250 Malaysia
NAS1149D0363H 2021-05-123 250 Malaysia
NAS1149D0363H 2021-02-41 258 India
AN960D10 2020-05-149 55 United States
NAS1149D0363H 2020-05-147 1000 US
NAS1149D0363H 2020-05-147 1000 US
5310-00-851-0913 2020-01-09 100 US
AN960D10 2019-09-249 28 United States
5310-00-851-0913 2019-05-130 12 us
5310-00-851-0913 2018-10-278 40 us
5310-00-851-0913 2018-04-108 1000 MANUAL
AN960D10 2018-04-108 1 United Arab Emirates
NAS1149D0363H 2018-04-108 1000 United Arab Emirates
NAS1149D0363H 2017-08-220 100 Sri Lanka
NAS1149D0363H 2017-06-172 30 United States
AN960D10 2016-10-278 200 Saudi Arabia
AN960D10 2016-05-124 1 United States
AN960D10 2016-05-124 3 United States
AN960D10 2016-05-124 8 United States
AN960D10 2016-05-124 15 United States
AN960D10 2016-05-124 30 United States
AN960D10 2016-04-96 100 United States
AN960D10 2014-12-336 408 US
AN960D10 2014-04-104 500 Brazil
NAS1149D0363H 2014-02-51 1 US
AN960D10 2014-01-30 12 US
5310-00-851-0913 2014-01-26 4796 DIBBS
5310-00-851-0913 2013-06-155 19464 DIBBS
NAS1149D0363H 2013-05-134 5 CZ
AN960D10 2012-11-310 72
AN960D10 2012-06-166 4 US
AN960D10 2012-06-166 4 US
AN960D10 2012-05-128 5 Canada
5310-00-851-0913 2011-12-336 22555 DIBBS
5310-00-851-0913 2011-08-228 610 United States
5310-00-851-0913 2011-06-175 2 US
AN960D10 2011-05-132 50 Spain
AN960D10 2011-03-82 1 Australia
AN960D10 2011-02-47 120 United States
AN960D10 2010-09-246 3000 United States
AN960D10 2010-09-246 3000 United States
5310-00-851-0913 2010-07-194 1 United States
AN960D10 2010-03-77 250 DE
5310-00-851-0913 2010-02-57 2000 Singapore
5310-00-851-0913 2009-11-307 6 United States
5310-00-851-0913 2009-08-243 6801 Brazil
NAS1149D0363H 2009-07-184 1 Brazil
NAS1149D0363H 2009-04-93 1000 Turkey
5310-00-851-0913 2009-04-91 27814 DIBBS
5310-00-851-0913 2009-03-82 43118 DIBBS
5310-00-851-0913 2008-09-253 14009 DIBBS
NAS1149D0363H 2008-09-252 1000 US
NAS1149D0363H 2008-07-205 3120 US
NAS1149D0363H 2008-02-58 100 MX
NAS1149D0363H 2006-10-291 280 US
AN960D10 2006-07-207 20 IT

Cross Reference | NSN 5310-00-851-0913

Part Number Cage Code Manufacturer
AN960D10 88044 AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
NAS1149D0363H 10630 ANILLO INDUSTRIES, INC. DBA ANILLO INDUSTRIES
NAS1149D0363H 80205 NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES

Request a Quote

What Our Customers Say

Compare

NSNs for Compare ( up to 4 ): Add 5310-00-851-0913

Technical Data | NSN 5310-00-851-0913

Characteristic Specifications
MATERIAL ALUMINUM ALLOY 2024 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE 1 ROUND
OVERALL DIAMETER 0.433 INCHES MINIMUM AND 0.458 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE 1 ROUND
CROSS-SECTIONAL SHAPE STYLE 1 RECTANGULAR
THICKNESS 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
SPECIAL TEST FEATURES FLEET BALLISTIC MISSILE QUALITY AS IDENTIFIED BY QUALITY CONTROL NO. POSO 910894
DEPARTURE FROM CITED DESIGNATOR AS MODIFIED BY SPECIAL TEST FEATURES

Restrictions/Controls & Freight Information | NSN 5310-00-851-0913

Category Code Description
Shelf-Life Code:0Nondeteriorative
Hazardous Material Indicator CodeNThere is no data in the HMIS and the NSN is in an FSC not generally suspected of containing hazardous materials
Demilitarization Code:ANon-Munitions List Item/ Non-Strategic List Item - Demilitarization not required.
Controlled Inventory Item Code:UUNCLASSIFIED
Precious Metals Indicator Code:UPrecious metal type is unknown
Criticality Code:FThe item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP).
Category Code Description
NMF Description 194120 WASHERS/GASKETS/PCKG DVCS NOI
Less than car load rating
Less than truck load rating W Rating Variable
Water commodity Code 713 unknown
Originating Activity Code XX
Air Dimension Code A Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Air Commodity B Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Air Special Handling Z No special handling required.
Special Handling Code 9 unknonwn
HAZMAT
Type of Cargo Z No special type of cargo code applicable

Management | NSN 5310-00-851-0913

Category Code Description
Materiel Category and Inventory ManagerT Industrial Supplies (DLA/GSA Items)
Appropriation and Budget Activity2 Stock Fund Secondary Items
Management Inventory Segment2 NONREPARABLE ITEMS (Exclusive of Insurance and Provisioning Items). This code will be used to identify items which are not reparable.
Specific Group/Generic Code0 Medical Materiel
Weapons Systems/End Item or Homogeneous Group00DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements CodeX Expendable item. An item of Army property coded with an ARC of ?X? in the AMDF. Expendable items require no formal accountability after issue from a stock record account. Commercial and fabricated items similar to items coded ?X? in the AMDF are considered expendable items.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDADepartment of the Army
Service OrganizationAU.S. Army
ReparabilityZThis is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
HD : Each
Category Code Description
Budget Code9 General Support DIV57X4921.070:Air Force decentrally managed expense items (ERRC XB3, XF-3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors.
Fund CodeSFStock fund applicable to items managed for the Air Force by the respective Inventory Control Point.
Materiel Management Aggregation CodeSXSX:AF SICA RESIDUAL MMAC-OC-ALC
Price ValidationV The current standard price has been validated.
  • The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
  • The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
  • ZOP or Standard price challenges are permissible but must be supported by adequate justification.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDFDepartment of the Air Force
Service OrganizationFU.S. Air Force
ReparabilityNStock Fund (except Munitions)
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
HD : Each
Category Code Description
Stores Account Code1Marine Corps Stock Fund Account Item.
Combat Essentiality Code5Critical Repair Part to a Combat Essential End Item. Those parts or components whose failure in a combat essential end item will render the end item inoperative or reduce its effectiveness below the minimum acceptable level of efficiency.
Materiel Management CodeBAll CommoditiesDefense Logistics Agency, (DLA,)
Echelon Management Code2ICP/DSSC Marine Corps-managed Recoverability Code D items and Defense Logistics Agency (DLA)/TACOM/GSA) items which the integrated manager has not decontrolled.
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDMU.S. Marine Corps
Service OrganizationMU.S. Marine Corps
ReparabilityZNonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code.
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
HD : Each
Category Code Description
Cognizance Codes9BNavy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Source of SupplySMSDefense Logistics Agency
Enterprise Business Systems
AgencyDNDepartment of the Navy
Service OrganizationNU.S. Navy
Acquisition Advice CodesDDoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED # Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Controlled Item CodeUUNCLASSIFIED
Shelf Life Code0Nondeteriorative
Purchasing QTY
UOM
1
HD : Each